THEODORE, AL —
OSHA Inspection: BARNETT MILLWORKS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BARNETT MILLWORKS, INC. in 4915 HAMILTON BLVD, THEODORE, AL 36590 (NAICS 321911). OSHA activity number 347374423.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARNETT MILLWORKS, INC.
- Site address
- 4915 HAMILTON BLVD
- City
- THEODORE
- State
- AL
- ZIP
- 36590
- Mailing
- PO BOX 389, THEODORE, AL 36582
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 165
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Sep 19, 2024
- Penalty
- Initial $8,816 · Current $6,171 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Miter Mite Backnailer #1: On or about March 27 and at times prior thereto, the employer exposed employees to amputation hazards in the point of operation on the Miter Mite Backnailer #1 was not provided with guarding for employees operating the machine. b) Miter Mite Backnailer #3: On or about March 27 and at times prior thereto, the employer exposed employees to amputation hazards in the point of operation on the Miter Mite Backnailer #1 was not provided with guarding for employees operating the machine.
Recent events (2)
- — I (S) $6171
- — Z (S) $8816
1910.147 C04 I
- Issued
- Sep 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Backnailer Station #1: On or about March 26, 2024, and at times prior thereto, the employer exposed employees to amputation hazards in that the employer did not require employees to use the 084 procedure to control the potentially hazardous energy for the backnailer while installing guards on the machine.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 IV
- Issued
- Sep 19, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) Production Plant: On or about March 27 and at times prior thereto, the employer did not certify that employee training had been accomplished and kept up to date regarding Lock Out Tag Out.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E02
- Issued
- Sep 19, 2024
- Abate by
- Oct 1, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: a) Facility-wide: On or about March 27, 2024, and a times prior thereto, the employer did not ensure that portable fire extinguishers throughout the facility were subjected to a monthly inspection.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B01 I
- Issued
- Sep 19, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(1)(i): Electrical equipment was not suitable for installation and use in conformity with the provisions of this subpart and not free from recognized hazards that are likely to cause death or serious physical harm to employees. a) Near Mitre Mite Back Nailer #1: On or about March 27, 2024, and at times prior thereto, employees were allowed to use an extension cord with a steel box enclosure.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Barnett Millworks, INC.
View Barnett Millworks, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347374423.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.