MURRIETA, CA ·
OSHA Inspection: DEPARTMENT OF HOMELAND SECURITY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DEPARTMENT OF HOMELAND SECURITY in 26871 HOBIE CIRCLE SUIT C3-C5, MURRIETA, CA 92562 (NAICS 928110). OSHA activity number 338985260.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DEPARTMENT OF HOMELAND SECURITY
- Site address
- 26871 HOBIE CIRCLE SUIT C3-C5
- City
- MURRIETA
- State
- CA
- ZIP
- 92562
- Mailing
- 25762 MADISON AVE, MURRIETA, CA 92562
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 5
- Ownership type
- Federal government (D)
Citations
5 citations on file for this inspection.
1910.178 A06
- Issued
- May 24, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were not maintained in a legible condition: On or about 19 March 2013, and times prior to, the employer did not ensure that all nameplates on the forklift were maintaned in legible condition.
Recent events (1)
- · Z (S) $0
1910.212 A01
- Issued
- May 24, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. On or about 19 March 2013, and times prior to, the employer did not ensure that the Delta 14" drill press utilized by employees in the maintenance shop were equipped with a protective chuck guard to prevent caught-in hazards of rotating parts.
Recent events (1)
- · Z (S) $0
1910.215 A04
- Issued
- May 24, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about 19 March 2013, and times prior to, the employer did not ensure that the work rest on the bench grinders were adjusted properly.
Recent events (1)
- · Z (S) $0
1910.215 B09
- Issued
- May 24, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. On or about 19 March 2013, and times prior to, the employer failed to ensure that the tongue guard on the bench griders were properly adjusted.
Recent events (1)
- · Z (S) $0
1910.334 A02 II
- Issued
- May 24, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service: On or about 19 March, and times their prior to, the employer did not ensure that a fan in use with a missing ground pin was removed from service.
Recent events (1)
- · Z (S) $0
More inspections at Department of Homeland Security
View Department of Homeland Security's full OSHA safety record →
More inspections in this industry (NAICS 928110)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338985260.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.