NEW HAVEN, CT —
OSHA Inspection: SPACE-CRAFT MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SPACE-CRAFT MANUFACTURING, INC. in 300 EAST STREET, NEW HAVEN, CT 06511 (NAICS 336412). OSHA activity number 338988538.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPACE-CRAFT MANUFACTURING, INC.
- Site address
- 300 EAST STREET
- City
- NEW HAVEN
- State
- CT
- ZIP
- 06511
- Mailing
- 300 EAST STREET, NEW HAVEN, CT 06511
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336412
- Employees
- 50
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.184 I01
- Issued
- May 9, 2013
- Abate by
- May 17, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.184(i)(1): Sling identification. Each sling shall be marked or coded to show the rated capacities for each type of hitch and type of synthetic web material. WORKSHOP: The six foot synthetic web sling was not marked with a tag or an equivalent for capacity rating. ABATED DURING THE INSPECTION.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.219 C02 I
- Issued
- May 9, 2013
- Abate by
- Jun 26, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires. WORKSHOP: The horizontal shaft in between the motor housing and the wheel of the deburring machine, unknown identification was unguarded.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.219 C04 I
- Issued
- May 9, 2013
- Abate by
- Jun 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves. WORKSHOP: The horizontal shaft end/nut of the deburring machine, unknown identification was unguarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- May 9, 2013
- Abate by
- Jun 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The basic advisory information on respirators, as presented in Appendix D of this section, shall be provided by the employer in any written or oral format, to employees who wear respirators when such use is not required by this section or by the employer. WORKSHOP: The employer had not provided the employee, wearing a dust mask respirator on a voluntary basis with the information contained within the Appendix D of the respiratory protection standard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Space-Craft Manufacturing, INC.
View Space-Craft Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336412)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338988538.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.