NORTH SYRACUSE, NY —
OSHA Inspection: MATERIAL HANDLING TECHNOLOGIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MATERIAL HANDLING TECHNOLOGIES, INC. in 7488 ROUND POUND ROAD, NORTH SYRACUSE, NY 13212 (NAICS 332312). OSHA activity number 339028995.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MATERIAL HANDLING TECHNOLOGIES, INC.
- Site address
- 7488 ROUND POUND ROAD
- City
- NORTH SYRACUSE
- State
- NY
- ZIP
- 13212
- Mailing
- 7488 ROUND POUND ROAD, NORTH SYRACUSE, NY 13212
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 19
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 C01
- Issued
- Jul 5, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: a) Field Storage Area, on or about 5/8/13: Storage Area above Boiler Room was not guarded by a standard railing along the open side exposing employees to a 9 foot 8 inch fall hazard. b) Field Storage Area, on or about 5/8/13: Storage Area above Break Room was not guarded by a standard railing along the open side exposing employees to a 9 foot 8 inch fall hazard.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.178 L01 I
- Issued
- Jul 5, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Throughout the facility, on or about 5/8/13: Powered industrial truck operators were not provided with training.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.212 A01
- Issued
- Jul 5, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a) Shop Area, on or about 5/8/13: A pneumatic Millrite was not provided with a chuck and tool guard. b) Shop Area, on or about 5/8/13: A Wilton 15" Driill Press was not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.242 B
- Issued
- Jul 5, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Shop Area, on or about 5/8/13: Employees using compressed air for cleaning purposes was measured at approximately 90 p.s.i.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.304 G05
- Issued
- Jul 5, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous and effective: a) Shop Area, on or about 5/8/13: Plug used for overhead light on the Metal Shear had the ground pin missing from plug end.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
More inspections at Material Handling Technologies, INC.
View Material Handling Technologies, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339028995.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.