VALLEY HEAD, AL —
OSHA Inspection: HARCO METAL PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HARCO METAL PRODUCTS, INC. in 162 JACK COOPER DRIVE, VALLEY HEAD, AL 35989 (NAICS 332912). OSHA activity number 339031205.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARCO METAL PRODUCTS, INC.
- Site address
- 162 JACK COOPER DRIVE
- City
- VALLEY HEAD
- State
- AL
- ZIP
- 35989
- Mailing
- 7895 EAST ACOMA DRIVE, SCOTTSDALE, AZ 85260
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332912
- Employees
- 46
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A04
- Issued
- Jun 5, 2013
- Abate by
- Jun 24, 2013
- Penalty
- Initial $4,200 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch: (a) On or about 5/1/2013 - Heil area, the work rests on three (3) DAYTON floor-mounted bench grinders, Model 4Z909C were adjusted at 1/2 inch from the wheel. (b) On or about 5/1/2013 - Heil Area, the work rests on two (2) of three (3) DAYTON floor-mounted bench grinders, Model 4Z909C were missing.
Recent events (2)
- — I (S) $2520
- — Z (S) $4200
1910.215 B09
- Issued
- Jun 5, 2013
- Abate by
- Jun 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) On or about 5/1/2013 - Heil area, the safety guard(s) on three (3) DAYTON floor mounted bench grinders, Models 4Z909C were adjusted to between 1 inch and 2 inches.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jun 5, 2013
- Abate by
- Aug 1, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) On or about 5/1/2013 - Danfoss area, Heil area, and Saw area, employees working with hazardous chemicals including, but not limited to, Mean Green, Fusion Fuze Clean FS, and Doringer H-32 Coolant Concentrate (10:1) had not been trained.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.147 C04 I
- Issued
- Jun 5, 2013
- Abate by
- Aug 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about May/1/2013 - Danfoss area, Heil area, Saw area, procedures were not developed and documented for equipment such as, but not limited to, CNC machines located near the Danfoss area, a Leonard Tube Master, Model 3 CPVD, Serial #1222 in the Heil area, and the Doringer Rotating Metal Chop Saw, Model D3540, Serial # 21772 in the Saw area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Harco Metal Products, INC.
View Harco Metal Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332912)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339031205.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.