FELICITY, OH —
OSHA Inspection: ARCO WOOD PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ARCO WOOD PRODUCTS, INC. in 1105 STATE ROUTE 133, FELICITY, OH 45120 (NAICS 423990). OSHA activity number 339031536.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARCO WOOD PRODUCTS, INC.
- Site address
- 1105 STATE ROUTE 133
- City
- FELICITY
- State
- OH
- ZIP
- 45120
- Mailing
- 1105 STATE ROUTE 133, FELICITY, OH 45120
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423990
- Employees
- 15
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 D03
- Issued
- Aug 27, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $1,600 · Current $600 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). a) On or about April 26, 2013 the electrical disconnect was not shut off at the electrical disconnect box to disable power on the #1 Mizer Saw during blade change.
Recent events (2)
- — I (S) $600
- — Z (S) $1600
1910.147 D04 I
- Issued
- Aug 27, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. a) On or about April 26 2013, a lock was not attached on the electrical disconect on the #1 Mizer to disable electrical power.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Aug 27, 2013
- Abate by
- Oct 15, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. a) Forklift refresher training was not conducted every three year to evaluate the operators knowledge and performance, while operating a powered industrial lift truck.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.212 A01
- Issued
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a) Machine guarding was not provided on the Hoon Hsiang sander indexing arm, expoing employees to pinch points/struck by hazards.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.219 E03 I
- Issued
- Aug 27, 2013
- Penalty
- Initial $1,600 · Current $600 Reduced
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section. a) Belt on the #1 Mizer Saw in the cutting area was not guarded to prevent employees exposure to moving parts and/or pinch points. b) Belt on the Hoon Hsiang sander in the sanding area was not guarded to prevent employees exposure to moving parts and/or pinch points.
Recent events (2)
- — I (S) $600
- — Z (S) $1600
1910.303 G02 I
- Issued
- Aug 27, 2013
- Penalty
- Initial $1,600 · Current $600 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidentalcontact by use of approved cabinets or other forms of approved enclosures or by any of the following means: a) The electrical connecting bolts for the #1 Mizer saw was not covered to prevent employees from contact with live electical parts.
Recent events (2)
- — I (S) $600
- — Z (S) $1600
1910.305 G01 IV A
- Issued
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): As a substitute for the fixed wiring of a structure; a) On the Production Line, a 110 Volt AC flexible power cords attached to stationary lighting fixtures were plugged into a set of extension cords that was directly wired into two receptacle electrical outlets.
Recent events (2)
- — I (O) $0
- — Z (S) $1200
More inspections at Arco Wood Products, INC.
View Arco Wood Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423990)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339031536.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.