Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: S.P. KINNEY ENGINEERS, INC.

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of S.P. KINNEY ENGINEERS, INC. in 143 FIRST AVENUE, CARNEGIE, PA 15106 (NAICS 331420). OSHA activity number 339053712.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch S.P. Kinney Engineers, INC. — free Get an email when a new federal OSHA severe-injury report for S.P. Kinney Engineers, INC. is published. One employer, no account, unsubscribe in one click.
Site address
143 FIRST AVENUE
City
CARNEGIE
State
PA
ZIP
15106
Mailing
143 FIRST AVENUE, CARNEGIE, PA 15106
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331420
Employees
26
Ownership type
A

8 citations on file for this inspection.

1910.213 B03

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Aug 15, 2013
Penalty
Initial $3,080 · Current $2,800 Reduced
29 CFR 1910.213(b)(3): Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after power failure:    a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 8, 2013, an employee was operating a Delta radial arm saw that was not equipped with an anti-restart device to prevent it from restarting automatically when the power first comes back on after a power failure.
Recent events (2)
  • — I (S) $2800
  • — Z (S) $3080

1910.213 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 9, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut:  a) Jobsite, 143 First Avenue, Carnegie, PA:  On or about May 5, 2013, an employee used a Delta radial arm saw with the lower guard stuck in an upright position.  This condition exposed the employee to the unguarded portion of the rotating lower blade.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.213 H04

Other-than-serious 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Jul 26, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:    a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 5, 2013, an employee was operating a Delta radial arm saw that did not return to its original position when it was released by the employee.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.219 E03 I

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Jul 26, 2013
Penalty
Initial $3,080 · Current $0 Reduced
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 5, 2013, an employee was exposed to an unguarded vertical belt/pulley system at the top rear of the King Mill machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3080

1910.253 B04 III

Other-than-serious 1 instance 2 exposed
Issued
Jul 9, 2013
Abate by
Jul 26, 2013
Penalty
Initial $2,310 · Current $1,400 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials, a minimum distance of 20 feet or by a noncombustible barrier at least 5 feet high having a fire-resistance rating of at least one-half hour:    a) Facility, Welding Area, 143 First Avenue, Carnegie, PA:  On or about May 5, 2013, oxygen cyclinders were stored approximately 3-4 feet from an acetylene cyclinder.
Recent events (2)
  • — I (O) $1400
  • — Z (S) $2310

1910.147 C06 I

Other-than-serious 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Aug 15, 2013
Penalty
Initial $154 · Current $0 Reduced
29 CFR 1910.147(c)(6)(ii): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 5, 2013, the employer was not conducting the periodic inspection of the energy control procedures they have for the equipment such as, but no limited to; the King Mill and the Bickford radial drill press that are covered by a lockout program.      S. P. Kinney Engineers, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 314114240, citation number 2, item number 2 and was affirmed as a final order on February 24, 2012, with respect to a workplace located at 143 First Avenue, Carnegie, PA.
Recent events (2)
  • — I (O) $0
  • — Z (R) $154

1910.179 J02 I

Repeat 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Aug 15, 2013
Penalty
Initial $154 · Current $150 Reduced
29 CFR 1910.179(j)(2)(i): Frequent inspections were not conducted on all functional operating mechanisms for maladjustment interfering with proper operation:    a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 8, 2013, cranes and crane components in the facility were not inspected on a daily basis.      S. P. Kinney Engineers, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29CFR 1910.179(j)(2)(i), which was contained in OSHA inspection number 314114240, citation number 1, item number 6b and was affirmed as a final order on February 24, 2012, with respect to a workplace located at 143 First Avenue, Carnegie, PA.
Recent events (2)
  • — I (R) $150
  • — Z (R) $154

1910.179 J02 III

Repeat 1 instance 1 exposed
Issued
Jul 9, 2013
Abate by
Aug 15, 2013
Penalty
Initial $154 · Current $150 Reduced
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with signed reports, were not performed:    a) Facility, 143 First Avenue, Carnegie, PA:  On or about May 8, 2013, crane hooks were not inspected and records were not maintained.      S. P. Kinney Engineers, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29CFR 1910. 179 (j)(2)(iii) which was contained in OSHA inspection number 314114240, citation number 1, item number 6c and was affirmed as a final order on February 24, 2012, with respect to a workplace located at 143 First Avenue, Carnegie, PA.
Recent events (2)
  • — I (R) $150
  • — Z (R) $154

View S.P. Kinney Engineers, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339053712.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.