GADSDEN, AL —
OSHA Inspection: PRINCE METAL STAMPING USA, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of PRINCE METAL STAMPING USA, INC. in 1108 AIRPORT INDUSTRIAL DRIVE, GADSDEN, AL 35904 (NAICS 336370). OSHA activity number 339058026.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRINCE METAL STAMPING USA, INC.
- Site address
- 1108 AIRPORT INDUSTRIAL DRIVE
- City
- GADSDEN
- State
- AL
- ZIP
- 35904
- Mailing
- 1108 AIRPORT INDUSTRIAL DRIVE, GADSDEN, AL 35904
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336370
- Employees
- 134
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A02
- Issued
- Sep 6, 2013
- Abate by
- Sep 25, 2013
- Penalty
- Initial $2,295 · Current $1,377 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: (a) On or about June 11, 2013 - Plant 2, oil was allowed to accumulate on the floor between the 400 Ton Verson and 400 Ton Blow presses creating a slip hazard.
Recent events (2)
- — I (S) $1377
- — Z (S) $2295
1910.212 A01
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $3,825 · Current $2,295 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about May 9, 2013 - Machine shop, an EMA Acadian drill press was not guarded to protect employees from rotating parts and flying particles. (b) On or about May 9, 2013- Maintenance shop, a lathe was not guarded to protect employees from rotating parts and flying particles. (c) On or about May 9, 2013 - Maintenance shop, a Kondia Powermill milling machine was not guarded to protect employees from rotating parts and flying chips.
Recent events (2)
- — I (S) $2295
- — Z (S) $3825
1910.215 B09
- Issued
- Sep 6, 2013
- Abate by
- Sep 18, 2013
- Penalty
- Initial $3,060 · Current $1,836 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) On or about May 9, 2013 - Tool shop, the tongue guard of a 6" Dewalt bench grinder was adjusted approximately one inch from the wheel.
Recent events (2)
- — I (S) $1836
- — Z (S) $3060
1910.178 Q07
- Issued
- Sep 6, 2013
- Abate by
- Sep 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined at least daily before being placed in service: (a) On or about May 9, 2013 - Facility, the employer did not ensure that daily examinations were conducted.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Prince Metal Stamping USA, INC.
View Prince Metal Stamping USA, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336370)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339058026.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.