SALINA, KS —
OSHA Inspection: GREAT PLAINS MANUFACTURING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GREAT PLAINS MANUFACTURING INC. in 601 IDLEWILD, SALINA, KS 67401 (NAICS 333111). OSHA activity number 339059008.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREAT PLAINS MANUFACTURING INC.
- Site address
- 601 IDLEWILD
- City
- SALINA
- State
- KS
- ZIP
- 67401
- Mailing
- 1621 DEWEY STREET, SALINA, KS 67401
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333111
- Employees
- 336
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C01
- Issued
- Jun 28, 2013
- Abate by
- Jul 25, 2013
- Penalty
- Initial $6,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: At the job site, 601 Idlewild, Salina, Kansas, employees were working from the elevated platform of an End Wheel Till Drill without a fall protection system in place. Employees were exposed to a fall hazard of approximately 5 feet 6 inches to the concrete floor.
Recent events (2)
- — I (S) $4200
- — Z (S) $6000
1910.219 D01
- Issued
- Jun 28, 2013
- Penalty
- Initial $3,000 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): At the job site, 601 Idlewild, Salina, Kansas, employees were operating the Index Milling Machine at S1, fabrication without guarding the side drive pulleys. Side covers were missing. Employees were exposed to in-going nip point hazards.
Recent events (2)
- — I (S) $2100
- — Z (S) $3000
1910.219 E01 I
- Issued
- Jun 28, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: At the job site, 601 Idlewild, Salina, Kansas, employees were operating the Index Milling Machine at S1, fabrication without the side belt cover guards in place. Employees were exposed to in-going nip point hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Jun 28, 2013
- Abate by
- Jul 25, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: At the job site, 601 Idlewild, Salina, Kansas, the employer had not performed a job hazardous assessment (JHA) on the Quality Assurance personnnel performing lid and bolt checks when working on the 3P1006 End Wheel Till Drilll. Employees are exposed to fall hazards while working from the platform.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Great Plains Manufacturing INC.
View Great Plains Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333111)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339059008.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.