TAMUNING, GU —
OSHA Inspection: APPLIANCE PARTS CENTER
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of APPLIANCE PARTS CENTER in 145 EAST HARMON INDUSTRIAL PARK RD. UNIT B, TAMUNING, GU 96913 (NAICS 444190). OSHA activity number 339086894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- APPLIANCE PARTS CENTER
- Site address
- 145 EAST HARMON INDUSTRIAL PARK RD. UNIT B
- City
- TAMUNING
- State
- GU
- ZIP
- 96913
- Mailing
- 145 EAST HARMON INDUSTRIAL PARK RD. UNIT B, TAMUNING, GU 96913
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 444190
- Employees
- 8
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 P01
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $900 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s). Warehouse Floor: On May 28, 2013, the Nissan forklift horn and lights were not operational.
Recent events (2)
- — I (S) $900
- — Z (S) $1200
1910.178 Q07
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were being placed in services after the examination showed condition(s) adversely affecting the safety of the vehicle: Warehouse Floor: On May 28, 2013, a daily inspection was not conducted on the Nissan forklift with horn and lights that were not operational.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in cabinets, boxes, and fittings shall be effectively closed. Showroom Floor: On May 28, 2013, the electric circuit breaker panel was missing fourteen switch panel plugs.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.305 B02 I
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: Warehouse Floor Middle Post: On May 28, 2013, the cover on the electric switch illuminating the warehouse was partially missing, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 D02
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.305(d)(2): Panelboards were not mounted in cabinets, cutout boxes, or enclosures designed for the purpose and/or were not dead front: Warehouse Floor: On May 28, 2013, the electric circuit breaker panel front was not flush against the rest of the enclosure, and was missing a front door.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.178 L04 III
- Issued
- Aug 15, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: Warehouse Floor: On May 28, 2013, employees were exposed to the hazards associated with untrained and uncertified personnel operating a forklift.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Appliance Parts Center
View Appliance Parts Center's full OSHA safety record →
More inspections in this industry (NAICS 444190)
More inspections in GU
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339086894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.