MILFORD, CT —
OSHA Inspection: C & C HYDRAULICS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of C & C HYDRAULICS, INC. in 717 BRIDGEPORT AVENUE, MILFORD, CT 06460 (NAICS 333995). OSHA activity number 339126104.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C & C HYDRAULICS, INC.
- Site address
- 717 BRIDGEPORT AVENUE
- City
- MILFORD
- State
- CT
- ZIP
- 06460
- Mailing
- 116 WOLCOTT ROAD, TERRYVILLE, CT 06786
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333995
- Employees
- 1
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Sep 30, 2013
- Abate by
- Oct 25, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): JOBSITE: The employer did not ensure through the completion of a training program and evaluation that the powered industrial forklift truck (PIT) operator was competent to operate the PIT safely at all times.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.403 I02 I
- Issued
- Sep 30, 2013
- Penalty
- Initial $2,000 · Current $700 Reduced
General-duty citation text
29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph: JOBSITE: The junction box, having a live electrical switch and suspended in the air by rigid conduit was not closed, exposing lnternal energized parts.
Recent events (2)
- — I (S) $700
- — Z (S) $2000
1926.403 I02 II
- Issued
- Sep 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.403(i)(2)(ii): In locations where electric equipment operating at 600 volts, nominal, or less is exposed to physical damage, enclosures or guards were not so arranged and of such strength as to prevent such damage: JOBSITE: The junction box, having a live electrical switch and suspended in the air was not adequately protected from physical damage.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B12
- Issued
- Sep 30, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.1053(b)(12): Ladders used where the employee or the ladder could contact exposed energized electrical equipment did not have nonconductive siderails: JOBSITE: The Little Giant aluminum ladder, that was used by the employee while assembling a hydraulic car lift, was placed in close proximity of a junction box, which was suspended in the air and also had a switch whose internal parts were exposed.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1053 B21
- Issued
- Sep 30, 2013
- Abate by
- Oct 10, 2013
- Penalty
- Initial $2,800 · Current $1,300 Reduced
General-duty citation text
29 CFR 1926.1053(b)(21): Each employee was not grasping the ladder with at least one hand when progressing up and/or down the ladder: JOBSITE: An employee was not grasping at least one hand to maintain a 3-point contact at all times while using the 14-foot stepladder. On or about 06/06/13, the employee, fell to the floor while descending the ladder and sustained severe head and upper back injuries from the incident.
Recent events (2)
- — I (S) $1300
- — Z (S) $2800
1926.1060 A
- Issued
- Sep 30, 2013
- Abate by
- Oct 25, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards: JOBSITE: The employee using portable stepladders to have access to upper levels was not provided with training and information regarding the safe use and handling of the ladders. 1. Louisville 14 ft fiberglass step ladder. 2. Little Giant Type 1A aluminum ladder.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at C & C Hydraulics, INC.
View C & C Hydraulics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333995)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339126104.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.