PLAINS TOWNSHIP, PA —
OSHA Inspection: BAKERY DELITE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BAKERY DELITE INC. in 290 SOUTH RIVER ST, PLAINS TOWNSHIP, PA 18705 (NAICS 311812). OSHA activity number 339135238.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BAKERY DELITE INC.
- Site address
- 290 SOUTH RIVER ST
- City
- PLAINS TOWNSHIP
- State
- PA
- ZIP
- 18705
- Mailing
- 290 SOUTH RIVER ST, PLAINS TOWNSHIP, PA 18705
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311812
- Employees
- 25
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.36 D01
- Issued
- Jul 2, 2013
- Abate by
- Jul 9, 2013
- Penalty
- Initial $1,200 · Current $800 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) Main Production Area: The emergency exit doors located at the front of the building were locked by use of a wooden board, as observed on or about June 25, 2013. b) Main Production Area: The emergency exit door located near the dock was locked by use of a toggle bolt, as observed on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (S) $800
- — Z (S) $1200
1910.37 A03
- Issued
- Jul 2, 2013
- Abate by
- Jul 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) Main production area: Access to the double emergency exit doors located at the front of the building was obstructed by tray racks and other equipment, as observed on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Jul 2, 2013
- Abate by
- Aug 19, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Main Production Area: The double emergency exit doors located at the front of the building were not marked by a sign reading "EXIT", as observed on or about June 25, 2013. b) Main Production Area: The emergency exit door located near the dock was not marked by a sign reading "EXIT", as observed on or about June 25, 2013. c) Italian Bread Production Area: The emergency exit door located to the side of the building was not marked by a sign reading "EXIT", as observed on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jul 2, 2013
- Abate by
- Aug 19, 2013
- Penalty
- Initial $900 · Current $500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Main Production Area: The pressing and rotating parts on the Comet Kaiser roll machine were not guarded, as observed on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (S) $500
- — Z (S) $900
1910.305 B02 I
- Issued
- Jul 2, 2013
- Abate by
- Aug 19, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Main Production Area: The cover on the receptacle behind the bagel machine was damaged, as observed on or about June 25, 2013 Abatement Certification Required
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Jul 2, 2013
- Abate by
- Aug 19, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) Main Production Area: The flexible cord on the Comet Kaiser roll machine was not provided with strain relief where the cord entered the machine nor at the plug end, as observed on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 II
- Issued
- Jul 2, 2013
- Abate by
- Aug 19, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Maintenance: The employer did not certify that periodic inspections of the energy control procedures had been performed, on or about June 25, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Bakery Delite INC.
View Bakery Delite INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311812)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339135238.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.