MALDEN, MA —
OSHA Inspection: FISHERMAN'S FLEET INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FISHERMAN'S FLEET INC. in 689 SALEM STREET, MALDEN, MA 02148 (NAICS 445220). OSHA activity number 339149718.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FISHERMAN'S FLEET INC.
- Site address
- 689 SALEM STREET
- City
- MALDEN
- State
- MA
- ZIP
- 02148
- Mailing
- 689 SALEM STREET, MALDEN, MA 02148
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445220
- Employees
- 12
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 C01
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: (a) Location - Roof of freezer in production area: On or about 9/20/13, employees were exposed to falls when the employer failed to ensure fall protection was on a work surface greater than 4 feet above the ground.
Recent events (2)
- — I (S) $1000
- — Z (S) $2800
1910.147 C04 I
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Location - Production area: On or about 6/27/13, The employer failed to develop, document and utilize control of potentially hazardous energy when employees were performing maintenance on a Baader 47 skinning machine.
Recent events (2)
- — I (S) $1000
- — Z (S) $2800
1910.178 L04 III
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years: (a) Location - Production area: On or about 6/27/13, the employer failed to ensure an employee satisfied refresher training and evaluations regarding powered industrial trucks.
Recent events (2)
- — I (S) $800
- — Z (S) $2000
1910.178 Q01
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) Location - Loading area: On or about 9/20/13, the employer failed to ensure that the powered industrial truck was in safe operating condition and it was not taken out of service.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Location - Loading aera: On or about 9/20/13, employer failed to ensure that the powered industrial truck was properly examined before use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 22, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Location - Production area: On or about 6/27/13, employees were exposed to abrasions and lacerations when the employer failed to adequately guard a Baader 47 skinning machine.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
More inspections at Fisherman'S Fleet INC.
View Fisherman'S Fleet INC.'s full OSHA safety record →
More inspections in this industry (NAICS 445220)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339149718.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.