Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEN-RUBBER LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GEN-RUBBER LLC in 352 SOUTH STREET, GALION, OH 44833 (NAICS 326299). OSHA activity number 339157729.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gen-Rubber LLC — free Get an email when a new federal OSHA severe-injury report for Gen-Rubber LLC is published. One employer, no account, unsubscribe in one click.
Establishment
GEN-RUBBER LLC
Site address
352 SOUTH STREET
City
GALION
State
OH
ZIP
44833
Mailing
352 SOUTH STREET, GALION, OH 44833
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326299
Employees
18
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 22, 2013
Abate by
Sep 25, 2013
Penalty
Initial $1,600 · Current $0 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees engaged in the activities covered by this section.     a) Gen-Rubber LLC located on 352 South Street in Galion, OH; On or about July 1, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when an employee performed sprocket changes on the rubber curb machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1600

1910.147 C06 II

Deleted Serious Gravity 5 1 instance 14 exposed
Issued
Aug 22, 2013
Abate by
Sep 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections were performed. The certification did not identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.  a) Gen-Rubber LLC located on 352 South Street in Galion, OH; On or about July 1, 2013, the employer did not certify that a periodic inspection of energy control procedures on equipment such as but not limited to the rubber curb machine was performed at least annually.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C07 I A

Other-than-serious 1 instance 1 exposed
Issued
Aug 22, 2013
Abate by
Oct 30, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i)(A): Authorized employee did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.      a) Gen-Rubber LLC located on 352 South Street in Galion, OH; On or about July 1, 2013, the employer did not assure that a maintenance technician that was exposed to unexpected startup and/or release of energy of the rub curb machine was properly trained to verify the machine was de-energized prior to performing maintenance.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.147 C07 IV

Deleted Serious Gravity 5 1 instance 14 exposed
Issued
Aug 22, 2013
Abate by
Sep 25, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date.   a)  Gen-Rubber LLC located on 352 South Street in Galion, OH; On or about July 1, 2013, the employer did not certify that employees received energy control training was accomplished on equipment such as but not limited to the rubber curb machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 22, 2013
Abate by
Sep 25, 2013
Penalty
Initial $1,600 · Current $1,600
29 CFR 1910.219(f)(3): All sprocket wheels less than 7 feet above the floor or platform were not enclosed.     a) Gen-Rubber LLC located on 352 South Street in Galion, OH: On or about July 1, 2013, the employer did not assure that the drive chain on the front of the curb machine in the assembly area was guarded.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $1600

View Gen-Rubber LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339157729.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.