FENTON, MO ·
OSHA Inspection: QUICKPOINT
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of QUICKPOINT in 1717 FENPARK DRIVE, FENTON, MO 63026 (NAICS 326199). OSHA activity number 339212425.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUICKPOINT
- Site address
- 1717 FENPARK DRIVE
- City
- FENTON
- State
- MO
- ZIP
- 63026
- Mailing
- 1717 FENPARK DRIVE, FENTON, MO 63026
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 48
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Sep 5, 2013
- Abate by
- Dec 6, 2013
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(1) One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by rotating parts: In the molding injection machine area, the Delta Division Rockwell Manufacturing Co drill press (SN 67-6423) had an unguarded chuck.
Recent events (2)
- · I (S) $1249.5
- · Z (S) $1785
1910.219 D01
- Issued
- Sep 5, 2013
- Abate by
- Dec 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): In the molding injection machine area, the horizontal belt and pulley belonging to the Delta Division Rockwell Manufacturing Co drill press (SN 67-6423) had a loose mesh cover rather than a securely fastened guard.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 E01 I
- Issued
- Sep 5, 2013
- Abate by
- Dec 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: In the molding injection machine area, the horizontal belt and pulley belonging to the Delta Division Rockwell Manufacturing Co drill press (SN 67-6423) had a loose open mesh cover rather than a securely fastened guard.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 L04 III
- Issued
- Sep 5, 2013
- Abate by
- Dec 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years: For the forklift operators who had not received performance evaluations every 3 years.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Quickpoint
View Quickpoint's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339212425.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.