SYRACUSE, NY —
OSHA Inspection: FALSO INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FALSO INDUSTRIES, INC. in 4100 NEW COURT AVE., SYRACUSE, NY 13206 (NAICS 332322). OSHA activity number 339230674.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FALSO INDUSTRIES, INC.
- Site address
- 4100 NEW COURT AVE.
- City
- SYRACUSE
- State
- NY
- ZIP
- 13206
- Mailing
- 4100 NEW COURT AVE., SYRACUSE, NY 13206
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 28
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 6, 2013
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: a) Punching Area, on or about 7/25/13: Rotating vertical spindle with a projecting setscrew on a Delta tapping head machine was not guarded. b) Debur Area, on or about 7/25/13: Rotating spindle ends and nut projections on a deburring wheel were not guarded.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.219 C04 I
- Issued
- Aug 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) Timesaver area, on or about 7/25/13: Rotating shaft ends on a Rand Bright timesaver were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Aug 6, 2013
- Abate by
- Sep 8, 2013
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Spot Welder Area, on or about 7/25/13: Point of operation on a National spot welder and a Miller spot welder were not guarded. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.242 B
- Issued
- Aug 6, 2013
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Punching Area, on or about 7/25/13: A compressed air gun at the Edlund drill press measured >90 psi. b) CNC Mill Area, on or about 7/25/13: A compressed air gun at the Sharp CNC mill measured >90 psi.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.304 G05
- Issued
- Aug 6, 2013
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Debur Area, on or about 7/25/13: A SMC pedestal fan was not grounded in that the ground pin was missing from the plug end. b) Debur Area, on or about 7/25/13: A deburring wheel was not grounded in that the ground pin was missing from the plug end.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.147 C06 I
- Issued
- Aug 6, 2013
- Abate by
- Sep 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) At the establishment, on or about 7/25/13: There were no periodic inspections conducted on the lockout/tagout procedures. Abatement certification must be submitted for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L06
- Issued
- Aug 6, 2013
- Abate by
- Sep 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) At the establishment, on or about 7/25/13: Evaluations of forklift operators had not been conducted since September, 2008. Abatement certification must be submitted for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Falso Industries, INC.
View Falso Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339230674.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.