OSHA Inspection: PTM OF BOISE, LLC DBA VALLEYRIDE

Issued

Jan 15, 2014

Abate by

Jan 28, 2014

Penalty

Initial $2,975 · Current $2,975

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and Tagout devices did not indicate the identity of the employee applying the device(s):  a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not ensure that the tag on the broken garage bay door identified who applied the tag and why it was applied.   Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

Jan 28, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(5)(iii): Tagout devices utilized did not warn against hazardous conditions if the machine or equipment was energized:  a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not ensure that the tag identified the hazardous condition on the garage bay door.  Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

Feb 11, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:   a)      In the Compressed natural Gas pump yard; On or before August 13, 2013, and at times prior thereto, the employer did not conduct any inspections of their energy control procedures for the CNG system.  b)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not conduct any inspections of their energy control procedures for the garage door.  Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

Feb 11, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certified that employee training had been accomplished:   a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not /could not certify that all authorized, affected or other employees had been trained on the parent company Lock out tag out energy control program.   Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

Feb 11, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.145(c)(3): Safety instruction sign(s) were not used where there was a need for general instructions and suggestions relative to safety measure(s):  a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not install signs for the eye wash station, the fire extinguishers or use of personal protective equipment.    Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

Feb 11, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):   a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not establish a work rule requiring employees to perform a pre-use check of the Toyota powered industrial truck prior to their use each day in order to identify problems, such as the leaking relief valve for the Compressed natural gas regulator.  Note: Abatement certification IS required for this item.

Issued

Jan 15, 2014

Abate by

May 1, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(a)(4): Capacity, operation, and maintenance instruction plates, tags or decals of the powered industrial truck were not changed accordingly:  a)      In the shop; On or before August 13, 2013, and at times prior thereto, the employer did not obtain a new data plate for the Toyota powered industrial truck (Model 7FGU26, S/N 64410 Type LP) when they converted it to a compressed natural gas fueled truck.   Note: Abatement certification and documentation ARE required for this item.

Issued

Jan 15, 2014

Abate by

Jan 28, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:   a)      In the air compressor shed inside the CNG yard; On or before August 13, 2013, and at times prior thereto, the overhead light fixture was missing a base and had exposed energized conductors at 6 feet 6 inches above the floor.  Note: Abatement certification IS required for this item.