BATH, PA —
OSHA Inspection: L&M FABRICATION & MACHINE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of L&M FABRICATION & MACHINE, INC. in 6814 CHRISPHALT DRIVE, BATH, PA 18014 (NAICS 332313). OSHA activity number 339300345.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- L&M FABRICATION & MACHINE, INC.
- Site address
- 6814 CHRISPHALT DRIVE
- City
- BATH
- State
- PA
- ZIP
- 18014
- Mailing
- P.O. BOX 124, BATH, PA 18014
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 70
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.179 K02
- Issued
- Dec 31, 2013
- Abate by
- Jan 16, 2014
- Penalty
- Initial $2,975 · Current $1,488 Reduced
General-duty citation text
29 CFR 1910.179(k)(2): Rated load test reports were not placed on file where they were readily available to appointed personnel: a) Building # 1, L&M Fabrication and Machine, Inc. - On or about August 15, 2013, the employer was using multiple overhead cranes without documentation of rated load test reports. b) Building # 2, L&M Fabrication and Machine, Inc. - On or about August 15, 2013, the employer was using multiple overhead cranes without documentation of rated load test reports. c) Building # 3, L&M Fabrication and Machine, Inc. - On or about August 15, 2013, the employer was using multiple overhead cranes without documentation of rated load test reports.
Recent events (2)
- — I (S) $1487.5
- — Z (S) $2975
1910.184 D
- Issued
- Dec 31, 2013
- Penalty
- Initial $2,529 · Current $0 Reduced
General-duty citation text
29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer: a) High Bay, Building 1, L&M Fabrication and Machine, Inc. - On or about August 27, 2013, employees were using a Synthetic web sling that had not been inspected for damage or defects by a competent person designated by the employer.
Recent events (2)
- — I (S) $0
- — Z (S) $2529
1910.184 I09
- Issued
- Dec 31, 2013
- Penalty
- Initial $0 · Current $1,265
General-duty citation text
29 CFR 1910.184(i)(9): Synthetic web sling was not immediately removed from service for having snags, cuts and tears. a) High Bay, Building 1, L&M Fabrication and Machine, Inc. - On or about August 27, 2013, employees were using a Synthetic web sling with snags, cuts, and tears in a tandem lift to handle a steel I beam weighing approximately 21,000 lbs.
Recent events (2)
- — I (S) $1264.5
- — Z (S) $0
1910.213 I01
- Issued
- Dec 31, 2013
- Penalty
- Initial $2,380 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.213(i)(1): Non-working portion(s) of the blade of bandsaw(s) were not enclosed or guarded: a) L&M Fabrication and Machine, Inc. - On or about August 27, 2013, employees were using a DoAll brand, model V-36 vertical band saw with non-working portions of the blade unguarded.
Recent events (2)
- — I (S) $1190
- — Z (S) $2380
1910.157 G02
- Issued
- Dec 31, 2013
- Abate by
- Jan 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) L&M Fabrication and Machine, Inc. - On or about August 15, 2013, the employer did not provide an educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with firefighting upon initial employment, and at least annually thereafter.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at L&M Fabrication & Machine, INC.
View L&M Fabrication & Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339300345.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.