DAHLONEGA, GA —
OSHA Inspection: AMERICAN MADE SHUTTERS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AMERICAN MADE SHUTTERS, INC. in 203 CHESTERRA DRIVE, DAHLONEGA, GA 30533 (NAICS 321911). OSHA activity number 339352924.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN MADE SHUTTERS, INC.
- Site address
- 203 CHESTERRA DRIVE
- City
- DAHLONEGA
- State
- GA
- ZIP
- 30533
- Mailing
- 203 CHESTERRA DRIVE, DAHLONEGA, GA 30533
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 119
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.106 E02 II B 2
- Issued
- Jan 17, 2014
- Abate by
- Feb 13, 2014
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.106(e)(2)(ii)(b)(2): The quantity of Category 2, 3 or 4 flammable liquid located outside of an inside storage room or storage cabinet in a building or in any one fire area of a building exceeded 120 gallons: On or about August 15, 2013: The employees working in the back production area were exposed to potential fire and smoke hazards. The employer had more than 300 gallons of flammable liquid stored outside of a flammable storage area or cabinet.
Recent events (2)
- — I (S) $2250
- — Z (S) $4500
1910.134 C02 II
- Issued
- Jan 17, 2014
- Abate by
- Feb 13, 2014
- Penalty
- Initial $2,700 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: On or about August 15, 2013: The employee working in the spray paint area and wearing a 3M half face, tight fitting respirator on a voluntary basis had not received a medical evaluation and the respirator was not properly cleaned, stored, nor was it maintained in a good condition.
Recent events (2)
- — I (S) $1350
- — Z (S) $2700
1910.95 D01
- Issued
- Jan 17, 2014
- Abate by
- Feb 13, 2014
- Penalty
- Initial $7,200 · Current $5,040 Reduced
General-duty citation text
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceeded the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: On or about August 15, 2013: The employee working on the Blue Line in the production area, utilizing the miter saw to cut aluminum and pvc inserts was exposed to an 8 hr time weighted average noise level of 88 decibels. The employer had not conducted recent monitoring to ensure employees are included in a hearing conservation program. The Louver Shop was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.95(d)(1), which was contained in OSHA inspection number 314203563, citation number 1, item number 1 and was affirmed as a final order on December 6, 2010, with respect to the workplace located at 203 Chesterra Drive, Dahlonega, Georgia 30533.
Recent events (2)
- — I (R) $5040
- — Z (R) $7200
1910.1200 H01
- Issued
- Jan 17, 2014
- Abate by
- Feb 28, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about August 15, 2013: Employees working in the production area were exposed to chemicals such as, but not limited to acrylic lacquers, lacquer thinner, cleaners, adhesives, and sealers on a daily basis. The employees had not received initial training prior to working with the chemicals.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at American Made Shutters, INC.
View American Made Shutters, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339352924.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.