Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: COLOSSUS FRAMING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of COLOSSUS FRAMING, INC. in 31 GRANT AVE E, BABYLON, NY 11702 (NAICS 238130). OSHA activity number 339436461.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Colossus Framing, INC. for free Get an email when a new federal OSHA severe-injury report for Colossus Framing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
31 GRANT AVE E
City
BABYLON
State
NY
ZIP
11702
Mailing
360A LEXINGTON AVENUE, WEST BABYLON, NY 11704
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
Private (A)

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 2 instances 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 4, 2014
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.    a) Worksite, roof - Employee engaged in roof work on a residential home was observed using a pneumatic nail gun to fasten sheathing and roofing material. Employees were not provided eye protection; on, or about 10/22/13.        b) Worksite, roof - Employees engaged in cutting wood material for a residential home used a hand held circular saws to cut material. The employees were not provided eye protection; on, or about 10/22/13.        Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (2)
  • · I (S) $1120
  • · Z (S) $1600

1926.304 D

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 26, 2014
Abate by
Mar 4, 2014
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:    a) Worksite, ground - Employee was engaged in cutting wood material for a residential home. Hand-held, circular saw used to cut material was used without the manufacturers safety cover/guard in position; on, or about 10/22/13.          Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1960
  • · Z (S) $2800

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 4, 2014
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):    a) Worksite, roof - Employees engaged in construction activities were observed working at the roof edge of a residential home, approximately 25 feet above the ground. One employee had a rope wrapped around his waist. Employees were not protected from falling, by guardrail systems, safety net systems or personal fall arrest systems; on, or about, 10/22/13.        Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1960
  • · Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 4, 2014
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    a) Worksite, roof - Employees were accessing a roof at the heights of approximately 25 feet. The portable ladder used to access the roof extended approximately one foot above the upper landing surface; on, or about, 10/22/13.      Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1400
  • · Z (S) $2000

View Colossus Framing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339436461.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.