CHARLESTON, IL —
OSHA Inspection: COM2 COMPUTERS AND TECHNOLOGIES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COM2 COMPUTERS AND TECHNOLOGIES, LLC in 777 WINDSOR DR, CHARLESTON, IL 61920 (NAICS 562920). OSHA activity number 339501421.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COM2 COMPUTERS AND TECHNOLOGIES, LLC
- Site address
- 777 WINDSOR DR
- City
- CHARLESTON
- State
- IL
- ZIP
- 61920
- Mailing
- 777 WINDSOR DRIVE, CHARLESTON, IL 61920
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562920
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Feb 13, 2014
- Abate by
- Feb 26, 2014
- Penalty
- Initial $3,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). The employer did not ensure that each operator had completed training that included all the topics listed in the standard and completed an evaluation of the operators performance through practical exercises prior to allowing employees to operate the forklift to move materials throughout the facility and to load and unload trucks, thereby exposing employees to struck-by and crush-by hazards.
Recent events (2)
- — I (O) $1000
- — Z (S) $3600
1910.178 L06
- Issued
- Feb 13, 2014
- Abate by
- Feb 26, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l). The employer did not certify that each operator had completed training that included all the topics listed in the standard and completed an evaluation of the operators performance through practical exercises prior to allowing employees to operate the forklift to move materials throughout the facility and to load and unload trucks, thereby exposing employees to struck-by and crush-by hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Feb 13, 2014
- Abate by
- Feb 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service. Employees were exposed to injury while operating a Toyota LPG forklift to move materials throughout the facility and to load and unload trucks because it was not being examined before being placed into service to identify conditions that could affect its safe operation.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Feb 13, 2014
- Abate by
- Feb 20, 2014
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose. Employees were exposed to electrical hazards because an electrical outlet located in the warehouse loading area was not equipped with a suitable cover.
Recent events (2)
- — I (S) $1800
- — Z (S) $3600
1910.1200 E01
- Issued
- Feb 13, 2014
- Abate by
- Feb 26, 2014
- Penalty
- Initial $3,600 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met. Employees were exposed to hazardous chemicals such as propane and a written hazard communication program had not been implemented and documented as required by the standard.
Recent events (2)
- — I (S) $2520
- — Z (S) $3600
1910.1200 H01
- Issued
- Feb 13, 2014
- Abate by
- Feb 26, 2014
- Penalty
- Initial $180 · Current $180
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. Employees were exposed to hazardous chemicals such as propane and a hazard communication training had not been provided to employees as required by the standard. COM2 Computers and Technologies, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(h)(1), which was contained in OSHA inspection number 329259, citation number 1, item number 11 c and was affirmed as a final order on 10/16/12, with respect to a workplace location at 140 Fullerton Ave, Carol Stream, IL.
Recent events (2)
- — I (R) $180
- — Z (R) $180
More inspections at COM2 Computers and Technologies, LLC
View COM2 Computers and Technologies, LLC's full OSHA safety record →
More inspections in this industry (NAICS 562920)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339501421.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.