Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: QUAD GRAPHICS TAUNTON BOOK

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of QUAD GRAPHICS TAUNTON BOOK in 1133 COUNTY STREET, TAUNTON, MA 02780 (NAICS 323117). OSHA activity number 339502619.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quad Graphics Taunton Book — free Get an email when a new federal OSHA severe-injury report for Quad Graphics Taunton Book is published. One employer, no account, unsubscribe in one click.
Site address
1133 COUNTY STREET
City
TAUNTON
State
MA
ZIP
02780
Mailing
1133 COUNTY STREET, TAUNTON, MA 02780
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
323117
Employees
275
Ownership type
A

3 citations on file for this inspection.

1910.212 A01

Other-than-serious 8 instances 16 exposed
Issued
Mar 14, 2014
Abate by
Jul 29, 2014
Penalty
Initial $4,000 · Current $2,000 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Bindery:    1)         The back side of the conveyor for the shrink wrap machine was not guarded.    2)         The turn in section table of the Dexter Casemaker was not guarded.     3)         The cam below the turn in section of the Dexter Casemaker was not guarded.     4)         The reciprocating feed arm of the Kolbus Stamper was not guarded.     5)         The mechanism pushing out the books of the trimmer of binder #4 was not adequately guarded.     6)         The compactor was not adequately guarded.    7)        The  reciprocating plate at the Magnacraft Stacker of the Perfect Binder was not guarded.    8)         The delivery mechanism at the trimmer of the Perfect Binder Line was not adequately guarded.     9)         The rotating wheel of the flywheel of the slitter was not guarded.
Recent events (3)
  • — F (O) $2000
  • — C (S) $4000
  • — Z (S) $4000

1910.219 D01

Deleted Serious Gravity 5 2 instances 10 exposed
Issued
Mar 14, 2014
Abate by
May 2, 2014
Penalty
Initial $4,000 · Current $0 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Bindery:  1)       A pulley and belt drive of the vacuum pump of the Dexter Case Folder was not enclosed by a guard.  2)       A pulley and belt drive of the reject machine was not enclosed by a guard.
Recent events (3)
  • — F (S) $0
  • — C (S) $4000
  • — Z (S) $4000

1910.219 F03

Deleted Serious Gravity 5 4 instances 10 exposed
Issued
Mar 14, 2014
Abate by
Jul 29, 2014
Penalty
Initial $5,000 · Current $0 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  Bindery:  1)          A chain and sprocket drive at the cover feeder for the Dexter Casemaker was not guarded.  2)          Chain and sprocket wheel drives at the turn in section of the Dexter Casemaker were not guarded.  3)           A chain and sprocket wheel drive behind the controls of the Kolbus Stamper was not guarded.  4)           A chain and sprocket wheel drive at the Perfect Binder Stacker was not guarded.
Recent events (3)
  • — F (S) $0
  • — C (S) $5000
  • — Z (S) $5000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339502619.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.