SCOTT TOWNSHIP, PA ·
OSHA Inspection: TIMES SHAMROCK CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TIMES SHAMROCK CORPORATION in 45 COMMERCE DR, SCOTT TOWNSHIP, PA 18447 (NAICS 323111). OSHA activity number 339518094.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TIMES SHAMROCK CORPORATION
- Site address
- 45 COMMERCE DR
- City
- SCOTT TOWNSHIP
- State
- PA
- ZIP
- 18447
- Mailing
- 45 COMMERCE DR, SCOTT TOWNSHIP, PA 18447
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 90
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.37 A03
- Issued
- Mar 28, 2014
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes were not free and unobstructed. Materials or equipment were placed, either permanently or temporarily, within the exit route: a) Production Area: An exit door in the northeast corner of the facility was blocked by rolls of paper, on or about December 12, 2013. ABATEMENT OBSERVED DURING INSPECTION NO CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $1500
- · Z (S) $3000
1910.212 A01
- Issued
- Mar 28, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, in-going nip points, rotating parts, flying chips and sparks: (a) Press #2: Machine guarding was not provided to protect the operator during the plate installation process exposing the worker to an in-going nip point hazard, on or about December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $5000
- · Z (S) $5000
1910.147 C04 II A
- Issued
- Mar 28, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(A): The lockout procedure did not include a specific statement of the intended use of the procedure: a) Scott Township, PA: The employer's lockout procedures for the #9 reel, the strapper #2, and the chiller did not include information on when the procedures are required to be used, on or about, December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $5000
1910.147 C06 I A
- Issued
- Mar 28, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $1,000
General-duty citation text
29 CFR 1910.147(c)(6)(i)(A): A periodic inspection of the energy control procedure was not performed: a) Scott Township, PA: The employer failed to perform a periodic (annual) inspection of the energy control procedures to ensure that the requirements of this standard are being followed, on or about December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $1000
- · Z (S) $0
1910.212 A02
- Issued
- Mar 28, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $5,000 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guards were not affixed to the machine: a) Press #2: Expanded metal guards used to cover multiple in-running nip points, including one created by the plate cylinder and an ink transfer roller, were not fastened to the machine by an acceptable means that would provided adequate protection for operators, on or about December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $2500
- · Z (S) $5000
1910.303 G02 I
- Issued
- Mar 28, 2014
- Penalty
- Initial $5,000 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures: a) Production Area: Exposed parts of a live bus bar located just below the pneumatic adjustments on the Cary reel stand exposed workers to an electric shock hazard, on or about December 12, 2013. ABATEMENT OBSERVED DURING INSPECTION NO CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $2500
- · Z (S) $5000
1904.30 B03
- Issued
- Mar 28, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $1,000 · Current $0 Reduced
General-duty citation text
29 CFR 1904.30(b)(3): Injuries and illnesses recorded on the OSHA 300 Log covered establishments other than that which the employee was employed: a) Scott Township, PA: The OSHA 300 log for 2013 contained entries for employees who work at a location other than that which is covered by the log, discovered on or about December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $1000
1910.303 G01 I B
- Issued
- Mar 28, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(B): The width of working space in front of electrical equipment was not the width of the equipment or 30 inches, whichever is greater: a) Press #2 Area: Access to several 480 volt panel boxes was blocked by large rolls of paper, on or about December 12, 2013. ABATEMENT OBSERVED DURING INSPECTION NO CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 H03 IV
- Issued
- Mar 28, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): Employees were not trained on the details of the hazard communication program developed by the employer, including an explanation of the labeling system and the material safety data sheet, and how employees can obtain and use the appropriate hazard information: a) Scott Township, PA: Employees did not receive training on the new format of the safety data sheets and container labeling, on or about December 12, 2013. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Times Shamrock Corporation
View Times Shamrock Corporation's full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339518094.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.