ELK GROVE VILLAGE, IL —
OSHA Inspection: DANCO PACKAGING SUPPLY COMPANY
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of DANCO PACKAGING SUPPLY COMPANY in 1901 WEST GREENLEAF AVENUE, ELK GROVE VILLAGE, IL 60007 (NAICS 322299). OSHA activity number 339529901.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DANCO PACKAGING SUPPLY COMPANY
- Site address
- 1901 WEST GREENLEAF AVENUE
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
- Mailing
- 1901 WEST GREENLEAF AVENUE, ELK GROVE VILLAGE, IL 60007
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322299
- Employees
- 50
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.178 L01 I
- Issued
- Apr 7, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $4,900 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Facility Wide - The employer did not ensure that each powered industrial truck operator was competent to operate the sit down powered industrial trucks safely as demonstrated by the successful completion of training and evaluation. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $4500
- — Z (S) $4900
1910.178 M05 III
- Issued
- Apr 7, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $4,900 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.178(m)(5)(iii): Powered industrial truck(s) with the operator dismounted and within 25 feet of the truck still in his view, did not have the load engaging means fully lowered, controls neutralized, and the brakes set to prevent movement: a) Facility Wide - On or about December 11, 2013, the employer failed to ensure that when an operator dismounted and was within 25 feet of Toyota fork lift truck (s/n 62136) still in the operator's view, the load engaging means of the vehicle were fully lowered, controls neutralized, and the brakes set to prevent movement while working on a paper roll. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $4500
- — Z (S) $4900
1910.178 Q07
- Issued
- Apr 7, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Powered industrial truck(s) which were used on a round-the-clock basis were not examined for defects after each shift: (a) Facility Wide - The employer failed to ensure all fork lift trucks such as the Toyota, TCM, and Komatsu fork lift trucks used on a round-the-clock basis were examined after each of the facilitys shifts. In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $1000
- — Z (S) $2800
More inspections at Danco Packaging Supply Company
View Danco Packaging Supply Company's full OSHA safety record →
More inspections in this industry (NAICS 322299)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339529901.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.