KANSAS CITY, MO ·
OSHA Inspection: GASKET ENGINEERING CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GASKET ENGINEERING CO., INC. in 4500 EAST 75TH TERRACE, KANSAS CITY, MO 64132 (NAICS 332119). OSHA activity number 339539637.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GASKET ENGINEERING CO., INC.
- Site address
- 4500 EAST 75TH TERRACE
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64132
- Mailing
- P.O. BOX 320288, KANSAS CITY, MO 64132
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 127
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.178 L04 III
- Issued
- Jan 27, 2014
- Abate by
- Mar 1, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Fork Lift Operators had not been recertified by evaluation of their driving at least once every three years.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.215 B09
- Issued
- Jan 27, 2014
- Abate by
- Mar 1, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Maintenance Shop in Wind Energy: An employee was exposed to being caught in or struck by flying debris created by the Baldor Pedestal Grinder which did not have a tongue guard on the right side facing the bench grinder.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.303 B02
- Issued
- Jan 27, 2014
- Abate by
- Mar 1, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Preco Area by HDPE Shredder: Employees were exposed to electrical hazards as a metal duplex outlet with prepunched knockouts was being used as a pendant and not attached to a piece of equipment or wall per listing or labelling instructions.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.305 B01 II
- Issued
- Jan 27, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Silicone Room: An employee was exposed to electrical hazards as the junction box by the old hood had two open knockouts. (b) Wind Energy, South Building: An employee was exposed to electrical hazards as the Rotary machine had an open knockout.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.305 G01 IV
- Issued
- Jan 27, 2014
- Abate by
- Mar 1, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): (a) Silicone Room: Employees were exposed to electrical hazards as the electrical cord from the junction box beside the hood was run directly through the ceiling.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
More inspections at Gasket Engineering CO., INC.
View Gasket Engineering CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339539637.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.