TURTLE LAKE, WI ·
OSHA Inspection: SANMINA INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SANMINA INC. in 300 INDUSTRIAL AVE, TURTLE LAKE, WI 54889 (NAICS 326121). OSHA activity number 339551244.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SANMINA INC.
- Site address
- 300 INDUSTRIAL AVE
- City
- TURTLE LAKE
- State
- WI
- ZIP
- 54889
- Mailing
- 300 INDUSTRIAL AVE, TURTLE LAKE, WI 54889
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326121
- Employees
- 550
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.303 G02 I D
- Issued
- Jan 31, 2014
- Abate by
- Mar 3, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i)(D): Except as elsewhere required or permitted by this standard, live parts of electrical equipment operating at 50 volts or more was not guarded by elevation of 8 feet or more above the floor or other working surface: a) In the office area; Hanging florescent lights in the office area of the facility were not elevated at least 8 feet above the floor.
Recent events (2)
- · I (S) $2040
- · Z (S) $3400
1910.305 G02 II
- Issued
- Jan 31, 2014
- Abate by
- Mar 3, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Hard-service cord and junior hard-service cord which did not retain the insulation, outer sheath properties, and usage characteristics of the cord were not repaired or pliced. Note: Hard service flexible cords No. 12 or larger may be spliced if the splice retains the insulation, outer sheath properties, and usage characteristics of the cord being spliced: a) In the molding area; Flexible cords that had damaged outer sheathing on them were energized and in use in the production area of the facility and were not repaired by splicing or taken out of service.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.305 G02 III
- Issued
- Jan 31, 2014
- Abate by
- Mar 3, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) In the molding area; Flexible cords that had stress relief at the plug end were energized and in use in the production area of the facility.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 C06 I
- Issued
- Jan 31, 2014
- Abate by
- Mar 3, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Throughout the facility; The employer did not conduct periodic inspections of the energy control procedures on an annual basis at a minimum.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Sanmina INC.
View Sanmina INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326121)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339551244.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.