OMAHA, NE —
OSHA Inspection: WYNNE TRANSPORT SERVICE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WYNNE TRANSPORT SERVICE, INC. in 2222 NORTH 11TH STREET, OMAHA, NE 68110 (NAICS 484121). OSHA activity number 339560815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WYNNE TRANSPORT SERVICE, INC.
- Site address
- 2222 NORTH 11TH STREET
- City
- OMAHA
- State
- NE
- ZIP
- 68110
- Mailing
- 2222 NORTH 11TH STREET, OMAHA, NE 68110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484121
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L04 III
- Issued
- Mar 7, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $3,366 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operators performance was not conducted at least once every three years: 2222 North 11th Street, Omaha, NE 68110 (Service Bay): The employer did not ensure that employees were not allowed operate a forklifts prior to their performance being evaluated at least once every three years. Abatement certification is required for this violation. The abatement certification sheet is enclosed with the citations.
Recent events (2)
- — I (S) $2500
- — Z (S) $3366
1910.212 A01
- Issued
- Mar 7, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $3,366 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: 2222 North 11th Street, Omaha, NE 68110 (Main Maintenance Shop): The employer did not ensure that adequate machine guarding was provided on machinery including, but not limited to the Craftsman Drill Press. Abatement certification is required for this violation. The abatement certification sheet is enclosed with the citations.
Recent events (2)
- — I (S) $2500
- — Z (S) $3366
1910.215 A04
- Issued
- Mar 7, 2014
- Penalty
- Initial $2,525 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: 2222 North 11th Street, Omaha, NE 68110 (Main Maintenance Shop): The employer did not ensure that the opening between the work rest and abrasive wheel did not exceed one-eighth inch on the 8-inch Dayton bench grinder. The opening was three-eighth inch.
Recent events (2)
- — I (S) $1500
- — Z (S) $2525
1910.215 B09
- Issued
- Mar 7, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: 2222 North 11th Street, Omaha, NE 68110 (Main Maintenance Shop): A tongue guard on the Dayton 8 bench grinder was not being used to ensure that it was adjusted to a 1/4 inch opening. The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top opening was 1 1/2 inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 D01
- Issued
- Mar 7, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed to the building: 2222 North 11th Street, Omaha, NE 68110 (Parts Room): The employer did not ensure that the mezzanine on which tools, parts and other materials were stored had the load rating marked on it. Abatement certification is required for this violation. Abatement certification sheet is enclosed with the citation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Wynne Transport Service, INC.
View Wynne Transport Service, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 484121)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339560815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.