SAN ANTONIO, TX —
OSHA Inspection: DIAMANTE ENTERPRISES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DIAMANTE ENTERPRISES, INC. in 4427 CENTERGATE, SAN ANTONIO, TX 78217 (NAICS 332322). OSHA activity number 339565525.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIAMANTE ENTERPRISES, INC.
- Site address
- 4427 CENTERGATE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78217
- Mailing
- 4427 CENTERGATE, SAN ANTONIO, TX 78217
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 C01
- Issued
- Apr 14, 2014
- Abate by
- Apr 27, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level was not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder: Second level storage floor. On or about January 28, 2014, and at times prior thereto, employee(s) were exposed to a fall of approximately 13 feet to the concrete level below, while moving supplies on the second floor.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.138 A
- Issued
- Apr 14, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $2,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.138(a): Employers did not select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes: Fabrication Shop, On or about January 28, 2014, in the Fabrication Shop, and at times prior thereto, employee(s) were exposed to hand lacerations from handling sheet metal without proper hand protection.
Recent events (2)
- — I (S) $0
- — Z (S) $2400
1910.212 A03 II
- Issued
- Apr 14, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded to prevent the operator from having any part of his body in the danger zone during the operating cycle: Fabrication Shop, west wall, Roto-Die hydraulic press brake, Model No. 10, Serial No. 82326. On or about January 28, 2014, and at times prior thereto, employees were exposed to an amputation hazard, as the brake was not guarded at the point of operation, while they performed press operations.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.219 F03
- Issued
- Apr 14, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): All sprocket wheels and chains were not enclosed and were not more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling was not provided: Fabrication Shop, near the west wall by the 10-foot Niagra power shear, On or about January 28, 2014, and at times prior thereto, employees were exposed to an amputation hazard, from the lack of a protective guard to encase the sprocket wheels and chains, approximately 3 feet from the floor, while working and walking in this area.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.305 A01 I
- Issued
- Apr 14, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.305(a)(1)(i): Metal raceways, cable trays, cable armor, cable sheath, enclosures, frames, fittings, and other metal noncurrent-carrying parts that are to serve as grounding conductors, with or without the use of supplementary equipment grounding conductors, were not effectively bonded where necessary to ensure electrical continuity and the capacity to conduct safely any fault current likely to be imposed on them: Fabrication Shop, Niagara Power Shear, Model 146A. On or about January 28, 2014, and at times prior thereto, employe(s) were exposed to electric shock, of approximately 230-460 Volts, from a damaged flexible metal conduit, while operating the press to cut metal into approximately 6 inch wide strips.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
More inspections at Diamante Enterprises, INC.
View Diamante Enterprises, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339565525.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.