MONTEVALLO, AL ·
OSHA Inspection: WOODGRAIN MILLWORK, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WOODGRAIN MILLWORK, INC. in 80 SOUTH SHELBY STREET, MONTEVALLO, AL 35115 (NAICS 321918). OSHA activity number 339572844.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WOODGRAIN MILLWORK, INC.
- Site address
- 80 SOUTH SHELBY STREET
- City
- MONTEVALLO
- State
- AL
- ZIP
- 35115
- Mailing
- 80 SOUTH SHELBY STREET, MONTEVALLO, AL 35115
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 54
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.23 A03
- Issued
- Jun 11, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.23(a)(3): Every hatchway and chute floor opening was not guarded by one of methods specified in (i) or (ii) of this section: (a) On or about 01/24/14 - at the Hog area, the floor opening to the pit for the Hog was not guarded.
Recent events (2)
- · I (S) $2040
- · Z (S) $3400
1910.23 D01
- Issued
- Jun 11, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.23(d)(1): Every flight of stairs having four or more risers was not equipped with standard stair railings or standard handrails as specified in paragraphs (d)(1)(i) through (v) of this section, the width of the stair to be measured clear of all obstructions except handrails: (a) On or about 1/24/14 - at the Rip Saw area, the stair railing was missing an intermediate rail at the stairs going to the walkway located after the saw.
Recent events (2)
- · I (S) $2040
- · Z (S) $3400
1910.147 C04 I
- Issued
- Jun 11, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about 1/24/14 - at the Lumber Gauger area, procedures were not utilized to control hazardous energy when employees cleaned under and around the feed tables.
Recent events (2)
- · I (S) $2040
- · Z (S) $3400
1910.212 A01
- Issued
- Jun 11, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 2/6/14 - in the Machine Shop, the rotating chuck and swarf were not guarded on the Jet JMD-18 drill press.
Recent events (2)
- · I (S) $2040
- · Z (S) $3400
1910.215 A04
- Issued
- Jun 11, 2014
- Penalty
- Initial $2,890 · Current $1,734 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) On or about 1/24/14 - in the Grinding room, the right-side work rest on the Baldor Grinder/Buffer had been dropped down and was not being used to support offhand grinding work.
Recent events (2)
- · I (S) $1734
- · Z (S) $2890
1910.219 E01 I
- Issued
- Jun 11, 2014
- Penalty
- Initial $5,100 · Current $3,060 Reduced
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) On or about 1/24/14 - at Moulders #1 through 4, the horizontal conveyor belt that moves scrap material to the Hog was not fully enclosed by guards when employees straddle the belt to set-up or service a moulder.
Recent events (2)
- · I (S) $3060
- · Z (S) $5100
More inspections at Woodgrain Millwork, INC.
View Woodgrain Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339572844.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.