NEWPORT BEACH, CA —
OSHA Inspection: SOUTH COAST SHIPYARD, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SOUTH COAST SHIPYARD, INC. in 223 21ST STREET, NEWPORT BEACH, CA 92663 (NAICS 336611). OSHA activity number 339577348.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTH COAST SHIPYARD, INC.
- Site address
- 223 21ST STREET
- City
- NEWPORT BEACH
- State
- CA
- ZIP
- 92663
- Mailing
- 223 21ST STREET, NEWPORT BEACH, CA 92663
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 E01
- Issued
- Feb 27, 2014
- Abate by
- Mar 13, 2014
- Penalty
- Initial $1,440 · Current $1,440
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not medically evaluated to determine ability to use a respirator prior to use. (Shipyard reference 29 CFR 1915.15) a) Onboard and around vessel GALATEA: A painter was using a 3M dual cartridge respirator while sanding wood and fiberglass and had not received medical evaluation to determine his ability to use equipment before use. b) Onboard and around vessel GALATEA: A painter was using a 3M 8210 N-95 respirator while sanding wood and fiberglass and had not received a medical evaluation prior to use of the equipment.
Recent events (1)
- — Z (S) $1440
1910.134 F02
- Issued
- Feb 27, 2014
- Abate by
- Mar 13, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: (Shipyard reference 29 CFR 1915.15) a) Onboard and around vessel GALATEA: A painter was using a 3M dual cartridge respirator while sanding and had not recieved annual fit testing. b) Onboard and around vessel GALATEA: A painter was using a 3M 8210 N-95 respirator while sanding and had not recieved annual fit testing.
Recent events (1)
- — Z (S) $0
1910.134 K05
- Issued
- Feb 27, 2014
- Abate by
- Mar 13, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(5): Employee(s) using a tight-fitting facepiece respirators were not trained annually. (Shipyard reference 29 CFR 1915.15) a) Onboard and around vessel GALATEA: A painter was using a 3M dual cartridge respirator while sanding on fiberglass and wood and had not received annual respirator training to ensure he knew why the respirator is required, and how improper fit, usage or maintenance could compromise the protective effect of the respirator. b) Onboard and around vessel GALATEA: A painter was using a 3M 8210 N-95 respirator while sanding fiberglass and wood and had not received annual respirator training to ensure he knew why the respirator is required, and how improper fit, usage or maintenance could compromise the protective effect of the respirator.
Recent events (1)
- — Z (S) $0
1910.134 L01
- Issued
- Feb 27, 2014
- Abate by
- Mar 13, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(l)(1): Evaluations of the workplace were not conducted to ensure the written respiratory protection program was being effectively implemented (Shipyard reference 29 CFR 1915.15): a) Onboard and around vessel GALATEA: The employer did not conduct an evaluation of the workplace as necessary to ensure the provisions of the written program were effectively implemented. A painter was using a 3M dual cartridge respirator while sanding on fiberglass and wood and he had not received annual respirator training, fit testing, or a medical evaluation. b) Onboard and around vessel GALATEA: The employer did not conduct an evaluation of the workplace as necessary to ensure the provisions of the written program were effectively implemented. A painter was using a 3M 8210 N-95 respirator while sanding on fiberglass and wood and he had not received annual respirator training, fit testing, or a medical evaluation.
Recent events (1)
- — Z (S) $0
More inspections at South Coast Shipyard, INC.
View South Coast Shipyard, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336611)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339577348.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.