HAZEL GREEN, AL —
OSHA Inspection: DIXIE METALCRAFT CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DIXIE METALCRAFT CORPORATION in 13887 HIGHWAY 231 431 N, HAZEL GREEN, AL 35750 (NAICS 336413). OSHA activity number 339579617.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIXIE METALCRAFT CORPORATION
- Site address
- 13887 HIGHWAY 231 431 N
- City
- HAZEL GREEN
- State
- AL
- ZIP
- 35750
- Mailing
- 13887 HIGHWAY 231 431 N, HAZEL GREEN, AL 35750
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 72
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 25, 2014
- Abate by
- May 7, 2014
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 02/06/14 - machine shop, the Lodge & Shipley Lathe did not have a chuck guard installed.
Recent events (2)
- — I (S) $2940
- — Z (S) $4900
1910.242 B
- Issued
- Apr 25, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $1,786 · Current $1,072 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. (a) On or about 02/16/14 - frame shop, compressed air was used with an output of 70 p.s.i. to clean the metal shavings off of the machines.
Recent events (2)
- — I (S) $1071.6
- — Z (S) $1786
1910.219 D01
- Issued
- Apr 25, 2014
- Abate by
- May 7, 2014
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o) (a) On or about 02/06/14 - laser area, the tumbler belt pulley guard was missing.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.219 E01 I
- Issued
- Apr 25, 2014
- Abate by
- May 7, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) On or about 02/06/14 - laser area, the horizontal tumbler belt was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Apr 25, 2014
- Abate by
- May 7, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. (a) On or about 02/06/14 - Machine shop, an energy control program has not been established or implemented for employees performing maintenance and servicing of machine shop equipment such as but not limited to CNC machines, lathes, milling machines, burning machines etc.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dixie Metalcraft Corporation
View Dixie Metalcraft Corporation's full OSHA safety record →
More inspections in this industry (NAICS 336413)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339579617.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.