HAZEL GREEN, AL —
OSHA Inspection: DIXIE METALCRAFT CORPORATION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of DIXIE METALCRAFT CORPORATION in 13887 HIGHWAY 231/431 NORTH, HAZEL GREEN, AL 35750 (NAICS 332322). OSHA activity number 341251031.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIXIE METALCRAFT CORPORATION
- Site address
- 13887 HIGHWAY 231/431 NORTH
- City
- HAZEL GREEN
- State
- AL
- ZIP
- 35750
- Mailing
- P.O. BOX 247, HAZEL GREEN, AL 35750
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 68
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.305 B01 II
- Issued
- Jun 21, 2016
- Penalty
- Initial $2,310 · Current $1,386 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) On or about February 11, 2016 - Molding department, two (2) electrical outlets had unused openings that were not closed.
Recent events (2)
- — I (S) $1386
- — Z (S) $2310
1910.305 G02 III
- Issued
- Jun 21, 2016
- Penalty
- Initial $2,310 · Current $1,386 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) On or about February 11, 2016 - Molding department, no strain relief was provided for an electrical cord servicing a Master Heat Gun HG 751B.
Recent events (2)
- — I (S) $1386
- — Z (S) $2310
1910.305 G01 IV A
- Issued
- Jun 21, 2016
- Abate by
- Jul 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) On or about February 11, 2016 - Molding Storage Room, an electrical cord was used in place of permanent wiring.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Jun 21, 2016
- Abate by
- Jul 24, 2016
- Penalty
- Initial $2,310 · Current $1,386 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) On or about February 11, 2016 - Molding department, the employer did not develop a hazard communication program for employees working in and around chemical such as, but not limited to, Magnobond, New Slide Dura-Kote Aerosol, and Hysol Epoxy Hardener.
Recent events (2)
- — I (S) $1386
- — Z (S) $2310
1910.1200 F05 I
- Issued
- Jun 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein: a) On or about February 11, 2016 - Molding department, secondary containers of chemicals such as, but not limited to, Magnobond and Hysol Epoxy Hardener, were not labeled to identify their contents.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 F05 II
- Issued
- Jun 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings: a) On or about February 11, 2016 - Molding department, secondary containers of chemicals such as, but not limited to, Magnobond and Hysol Epoxy Hardener, were not marked with information regarding the hazards of its contents.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.32 A04
- Issued
- Jun 21, 2016
- Penalty
- Initial $770 · Current $462 Reduced
General-duty citation text
29 CFR 1904.32(a)(4): The employer did not post an OSHA 300A Form or equivalent by February 1 thru April 30: a) On or about February 11, 2016 - Facility, the OSHA 300A for 2015 was not posted.
Recent events (2)
- — I (O) $462
- — Z (O) $770
1910.22 A01
- Issued
- Jun 21, 2016
- Abate by
- Jul 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: a) On or about February 11, 2016 - Molding department, water leaked into the work area during heavy rainfall.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dixie Metalcraft Corporation
View Dixie Metalcraft Corporation's full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341251031.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.