HAMILTON, OH ·
OSHA Inspection: BELL BURIAL VAULT COMPANY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BELL BURIAL VAULT COMPANY in 804 BELLE AVENUE, HAMILTON, OH 45015 (NAICS 327390). OSHA activity number 339591539.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BELL BURIAL VAULT COMPANY
- Site address
- 804 BELLE AVENUE
- City
- HAMILTON
- State
- OH
- ZIP
- 45015
- Mailing
- 804 BELLE AVENUE, HAMILTON, OH 45015
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- May 9, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees. Laborer employees were exposed to a struck-by hazard on a daily basis while using a Budgit two ton underhung overhead hoist in the shop area to lift concrete burial lids and vaults weighing 800 lbs. and 1600 lbs. with the safety latch on the hook missing.
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1910.178 L01 II
- Issued
- May 9, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). The Company had not ensured that employees authorized to operate the sit-down propane forklift in the shop area had not been evaluated based upon their previous operating experience and training completed required by paragraph (l).
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1910.184 E04
- Issued
- May 9, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.184(e)(4): Proof testing. The employer shall ensure that before use, each new, repaired, or reconditioned alloy steel chain sling, including all welded components in the sling assembly, shall be proof tested by the sling manufacturer or equivalent entity, in accordance with paragraph 5.2 of the American Society of Testing and Materials Specification A391-65, which is incorporated by reference as specified in Sec. 1910.6 (ANSI G61.1-1968). The employer shall retain a certificate of the proof test and shall make it available for examination. Four leg Alloy steel chain slings used in the shop area by employees in conjunction with an overhead hoist, were constructed from components and a welded ring had not been proof tested and a certificate of the proof test was not available for examination.
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1910.303 B02
- Issued
- May 9, 2014
- Penalty
- Initial $1,200 · Current $500 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling. In the shop area, two, 2 ft. x 2 ft. plastic box fans designed for indoor use were being used in the dusty shop environment to blow concrete dust away from the mixing area.
Recent events (2)
- · I (O) $500
- · Z (S) $1200
1910.37 B02
- Issued
- May 9, 2014
- Abate by
- May 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit must be clearly visible and marked by a sign reading "Exit." In the Shop Area an exit door leading to the outside of the building was not marked with a sign reading Exit.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Bell Burial Vault Company
View Bell Burial Vault Company's full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339591539.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.