AURORA, CO —
OSHA Inspection: ABRA AUTO BODY & GLASS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ABRA AUTO BODY & GLASS in 1690 S. ABILINE ST., AURORA, CO 80011 (NAICS 811121). OSHA activity number 339609273.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABRA AUTO BODY & GLASS
- Site address
- 1690 S. ABILINE ST.
- City
- AURORA
- State
- CO
- ZIP
- 80011
- Mailing
- 7225 NORTHLAND DRIVE STE. 210, BROOKLYN PARK, MN 55428
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 23
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.101 B
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $4,250 · Current $2,550 Reduced
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: (a) On or about March 3, 2014, and at times prior, the employer did not ensure that compressed shielding gas cylinders on welding carts were secure in such a manner as to prevent them from tipping or falling over.
Recent events (2)
- — I (S) $2550
- — Z (S) $4250
1910.132 A
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not maintained in a sanitary and reliable condition: (a) On or about March 3, 2014, and at times prior, employees were exposed to burns from sparks, heat, and molten material when leather welding gloves were not maintained in working condition. Abatement Note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $2040
- — Z (S) $3400
1910.254 D09 III
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced: (a) On or about March 3, 2014, and at times prior, the employer did not replace cables with exposed bare wires on an arc welder. Abatement note: Abatement certification is required for this item (See "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $2040
- — Z (S) $3400
1910.305 A02 X
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $3,400 · Current $2,040 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points: (a) On or about March 3, 2014, and at times prior, the employer did not ensure that frame rack control box cords were protected from pinch and crush damage where the frame racks were lowered onto them. Abatement note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $2040
- — Z (S) $3400
1910.305 G02 III
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) On or about March 3, 2014, and at times prior, the employer did not ensure that hanging flexible cords in the general body service bay were free from damage due to excessive strain. Abatement note: Abatement certification required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G01
- Issued
- Jun 4, 2014
- Abate by
- Jun 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: (a) On or about March 3, 2014, and at times prior, the employer did not ensure sufficient clearance around an electrical panel in the general body work service bay.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Abra Auto Body & Glass
View Abra Auto Body & Glass's full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339609273.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.