EVERETT, MA ·
OSHA Inspection: SCRAP IT, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SCRAP IT, INC. in 431 2ND STREET, EVERETT, MA 02149 (NAICS 423930). OSHA activity number 339617631.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCRAP IT, INC.
- Site address
- 431 2ND STREET
- City
- EVERETT
- State
- MA
- ZIP
- 02149
- Mailing
- 2 DEXTER STREET, EVERETT, MA 02149
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 15
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, a program consisting of energy control procedures, employee training, and periodic inspections has not been established to protect employees performing servicing and maintenance on machines and equipment from injury resulting from unexpected startup or release of stored energy.
Recent events (2)
- · I (S) $1750
- · Z (S) $3500
1910.178 P01
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, forklifts in need of replacement tires were not taken out of service.
Recent events (2)
- · I (S) $1750
- · Z (S) $3500
1910.212 A01
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, the unused portion of the blade of a Hugh Brown horizontal band saw was not guarded.
Recent events (2)
- · I (S) $1750
- · Z (S) $3500
1910.215 A04
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, a Ryobi bench grinder did not have a tool rest.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 D01
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, the belt and pulley of a Hugh Brown horizontal band saw was not guarded.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.243 C01
- Issued
- Apr 4, 2014
- Abate by
- May 9, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4): (a) Location - 431 2nd Street, Everett, MA: On or about 3/5/2014, the abrasive wheel of a Metabo angle grinder was not guarded.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Scrap IT, INC.
View Scrap IT, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339617631.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.