MONTGOMERY, AL —
OSHA Inspection: CONTRACTORS STEEL SUPPLY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONTRACTORS STEEL SUPPLY, INC. in 5230 OLD HAYNEVILLE ROAD 36108, MONTGOMERY, AL 36108 (NAICS 332312). OSHA activity number 339620775.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTRACTORS STEEL SUPPLY, INC.
- Site address
- 5230 OLD HAYNEVILLE ROAD 36108
- City
- MONTGOMERY
- State
- AL
- ZIP
- 36108
- Mailing
- PO BOX 1311, MONTGOMERY, AL 36102
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 60
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.219 C02 I
- Issued
- Mar 17, 2014
- Abate by
- Mar 27, 2014
- Penalty
- Initial $3,500 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Detail Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk in close proximity of an unguarded rotating shaft on the Peddinghaus transfer table.
Recent events (2)
- — I (S) $2000
- — Z (S) $3500
1910.219 C04 I
- Issued
- Mar 17, 2014
- Abate by
- Mar 27, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) Detail Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk in close proximity of an unguarded projecting shaft end that was not smooth and projected more than one and half times the diameter of the shaft on the Peddinghaus transfer table.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C04 II
- Issued
- Mar 17, 2014
- Abate by
- Mar 27, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: a) Detail Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk in close proximity of an unguarded projecting shaft end with an unused keyway on the Peddinghaus transfer table.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Mar 17, 2014
- Abate by
- Mar 25, 2014
- Penalty
- Initial $2,800 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Fabrication Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to compressed air hazards in that employees were allowed to use compressed air for cleaning that was not reduced to less than thirty p.s.i.
Recent events (2)
- — I (S) $1800
- — Z (S) $2800
1910.243 C01
- Issued
- Mar 17, 2014
- Abate by
- Mar 25, 2014
- Penalty
- Initial $2,100 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a): a) Detail Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to use a Dewalt vertical portable grinder with the guard removed.
Recent events (2)
- — I (S) $1100
- — Z (S) $2100
1910.305 B01 II
- Issued
- Mar 17, 2014
- Abate by
- Mar 25, 2014
- Penalty
- Initial $2,800 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Fabrication Shop; On or about February 26, 2014 and at times prior thereto the employer exposed employees to electrical hazards in that employees were allowed to access a breaker panel with an open breaker slot exposing live electrical parts in the panel.
Recent events (2)
- — I (S) $1800
- — Z (S) $2800
1904.32 A04
- Issued
- Mar 17, 2014
- Abate by
- Mar 25, 2014
- Penalty
- Initial $595 · Current $404 Reduced
General-duty citation text
29 CFR 1904.32(a)(4): The employer did not post an OSHA 300A Form or equivalent by February 1 thru April 30. a) Plant wide; On or about February 26, 2014 the employer failed to post the 2013 annual summary of work-related injuries and illnesses as required by the standard.
Recent events (2)
- — I (O) $404
- — Z (O) $595
More inspections at Contractors Steel Supply, INC.
View Contractors Steel Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339620775.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.