READING, PA ·
OSHA Inspection: CARPENTER TECHNOLOGY CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CARPENTER TECHNOLOGY CORPORATION in 101 WEST BERN STREET, READING, PA 19612 (NAICS 331111). OSHA activity number 339630725.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARPENTER TECHNOLOGY CORPORATION
- Site address
- 101 WEST BERN STREET
- City
- READING
- State
- PA
- ZIP
- 19612
- Mailing
- P.O. BOX 14662, READING, PA 19612
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331111
- Employees
- 2400
- Ownership type
- Private (A)
Citations
2 citations on file for this inspection.
1910.178 A06
- Issued
- May 13, 2014
- Abate by
- Jun 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The user did not ensure that all nameplates and markings were in place and were maintained in a legible condition: a) Carpenter Technology Corporation - The employer did not ensure that the nameplates were maintained on the Number 102 (M06488) and Number 96 (M05730) Straddle Carriers, on or about April 24, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.178 P01
- Issued
- May 13, 2014
- Abate by
- Jun 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): If at any time a powered industrial truck was found to be in need of repair, defective, or in any way unsafe, the truck was not taken out of service until it had been restored to a safe operating condition: INSTANCES (A), (B) & (H) ARE DELETED PER INFORMAL SETTLEMENT AGREEMENT SIGNED 6/9/14 a) Carpenter Technology Corporation - The employer did not take Straddle Carrier #95 (M10387) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. b) Carpenter Technology Corporation - The employer did not take Straddle Carrier #96 (M05730) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. c) Carpenter Technology Corporation - The employer did not take Straddle Carrier #149 (M09138) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about April 23, 2014. d) Carpenter Technology Corporation - The employer did not take Straddle Carrier #170 (M08818) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. e) Carpenter Technology Corporation - The employer did not take Straddle Carrier #172 (M09139) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. f) Carpenter Technology Corporation - The employer did not take Straddle Carrier #186 (M06027) out of service when defects were reported on the Mobile Equipment Shift Checklists, or about April 23, 2014. g) Carpenter Technology Corporation - The employer did not take Straddle Carrier #187 (M06067) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. h) Carpenter Technology Corporation - The employer did not take Straddle Carrier #359 (M12359) out of service when defects were reported on the Mobile Equipment Shift Checklists, on or about March 17, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Carpenter Technology Corporation
View Carpenter Technology Corporation's full OSHA safety record →
More inspections in this industry (NAICS 331111)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339630725.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.