WICHITA, KS —
OSHA Inspection: MCCORMICK-ARMSTRONG CO, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MCCORMICK-ARMSTRONG CO, INC. in 1501 EAST DOUGLAS, WICHITA, KS 67211 (NAICS 323110). OSHA activity number 339637175.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MCCORMICK-ARMSTRONG CO, INC.
- Site address
- 1501 EAST DOUGLAS
- City
- WICHITA
- State
- KS
- ZIP
- 67211
- Mailing
- 1501 EAST DOUGLAS, WICHITA, KS 67211
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323110
- Employees
- 65
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 27, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by in-going nip points, rotating parts, and/or flying chips and sparks: Machine guarding in the Maintenance area were not provided for the following machines to protect operators from laceration and possible amputation injuries. a) The 150 Craftsman Drill Press machine. b) The Guardian Power 12-Speed Heavy Duty Drill Press machine. c) The New Port Mill machine. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.215 A04
- Issued
- Mar 27, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: The Maintenance area - Employee operating the 8" Craftsman Professional Bench Grinder was exposed to tool jamming hazards in that the work rest on the left side of the operator was adjusted to 5/12 inch from the grinding wheel. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.215 B09
- Issued
- Mar 27, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): 29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: The Maintenance area - Employee operating the 8" Craftsman Professional Bench Grinder was exposed to injury in the event of wheel failure in that the adjustable tongue guards on the left side of the operator measured 0.5 inch from the grinding wheel. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Mar 27, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): The pulleys of the 150 Craftsman Drill Press machines were not fully guarded. Employee was exposed to in-running nip point hazards. 29 CFR 1910.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.219 E01 I
- Issued
- Mar 27, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): The horizontal belts of the 150 Craftsman drill press machine were not fully guarded. Employee was exposed to in-running nip point hazards. 29 CFR 1910.19(c)(1) requires certification that the abatement of the above violation is complete.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Mccormick-Armstrong CO, INC.
View Mccormick-Armstrong CO, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323110)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339637175.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.