WEST BERLIN, NJ —
OSHA Inspection: CONTINENTAL CAST STONE EAST BY RUSSELL, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONTINENTAL CAST STONE EAST BY RUSSELL, INC. in 400 COOPER ROAD, WEST BERLIN, NJ 08091 (NAICS 327991). OSHA activity number 339648339.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTINENTAL CAST STONE EAST BY RUSSELL, INC.
- Site address
- 400 COOPER ROAD
- City
- WEST BERLIN
- State
- NJ
- ZIP
- 08091
- Mailing
- 400 COOPER ROAD, WEST BERLIN, NJ 08091
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 57
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C01
- Issued
- Apr 25, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: (a) Continental Cast Stone, 400 Cooper Road, West Berlin, NJ, Production Area, Mold Storage: The area where molds are placed for removal and placement in the storage area was not provided with fall protection, observed on or about 3/26/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.110 E04 III
- Issued
- Apr 25, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers shall be securely mounted to prevent jarring loose, slipping, or rotating: (a) Continental Cast Stone, 400 Cooper Road, West Berlin, NJ, Production Area: The propane tanks for the two Mitsubishi Forklifts were not installed properly; bracket orientation pin was not positioned in the orientation hole, on or about 3/26/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.215 A04
- Issued
- Apr 25, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Continental Cast Stone, 400 Cooper Road, West Berlin, NJ, Maintenance Shop : The work rest on the yellow bench grinder, with no manufacturer markings, was adjusted to 1/2of an inch away from the abrasive wheel grinder, observed on or about 3/26/14 NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.215 B09
- Issued
- Apr 25, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Continental Cast Stone, 400 Cooper Road, West Berlin, NJ, Maintenance Shop : The tongue guard on the yellow bench grinder, with no manufacturer markings, was adjusted to 1 inch away from the abrasive wheel grinder, observed on or about 3/26/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Continental Cast Stone East by Russell, INC.
View Continental Cast Stone East by Russell, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339648339.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.