WICHITA, KS —
OSHA Inspection: PRINTING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PRINTING, INC. in 344 N. ST. FRANCIS, WICHITA, KS 67202 (NAICS 323122). OSHA activity number 339650640.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRINTING, INC.
- Site address
- 344 N. ST. FRANCIS
- City
- WICHITA
- State
- KS
- ZIP
- 67202
- Mailing
- 344 N. ST. FRANCIS, WICHITA, KS 67202
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323122
- Employees
- 64
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: In the maintenance area, the Craftsman Drill Press was missing a point of operation guard, exposing employees to a struck by and caught in hazard.
Recent events (2)
- — I (S) $1249.5
- — Z (S) $1785
1910.213 B03
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.213(b)(3): Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after power failure: In the maintenance area, the Craftsman Table Saw was not equipped with undervoltage protection to protect the equipment from automatically starting after a power failure, exposing employees to an amputation hazard.
Recent events (2)
- — I (S) $1249.5
- — Z (S) $1785
1910.215 B02
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.215(b)(2): Maximum permissible exposure angle(s) for the grinding wheel periphery or side(s) of abrasive wheel machinery were exceeded: In the maintenance area, the Craftsman Pedestal Grinder was missing a cover on the left wheel, exposing employees to a struck by and caught in hazard.
Recent events (2)
- — I (S) $1249.5
- — Z (S) $1785
1910.215 B09
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: In the maintenance area, the Craftsman Pedestal Grinder tongue guard was adjusted to approximately 7/16th inch gap between the wheel and the guard, exposing employees to a struck by hazard.
Recent events (2)
- — I (S) $1249.5
- — Z (S) $1785
1910.215 D03
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: In the maintenance area, the Craftsman Pedestal Grinder had residual metal builtup on the grinding wheel, exposing employees to a struck by hazard.
Recent events (2)
- — I (S) $1249.5
- — Z (S) $1785
1910.219 F03
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $3,570 · Current $2,499 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: In the Press Area, on the Sakurai Screen Press, two sprockets with chains were not guarded, exposing employees to a caught in hazard.
Recent events (2)
- — I (S) $2499
- — Z (S) $3570
1910.147 C06 I
- Issued
- Apr 15, 2014
- Abate by
- Jun 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: In the production area, required lockout/tagout procedures had not been reviewed annually, exposing employees to hazardous energy.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Printing, INC.
View Printing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323122)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339650640.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.