PIONEER, OH —
OSHA Inspection: PIONEER CUSTOM MOLDING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PIONEER CUSTOM MOLDING, INC. in 3 KEXON DR. P.O. BOX 463, PIONEER, OH 43554 (NAICS 326199). OSHA activity number 339651754.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PIONEER CUSTOM MOLDING, INC.
- Site address
- 3 KEXON DR. P.O. BOX 463
- City
- PIONEER
- State
- OH
- ZIP
- 43554
- Mailing
- 3 KEXON DR. P.O. BOX 463, PIONEER, OH 43554
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 35
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 15, 2014
- Abate by
- Jul 1, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about March 28, 2014, the employer did not assure that energy control procedures were developed and utilized to control hazardous energy when employees were performing tasks such as, but not limited to die changes, on the plastic injection machines. Employees were exposed to crushing injuries while performing these tasks.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.147 C07 I
- Issued
- May 15, 2014
- Abate by
- Jul 1, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) On or about March 28, 2014, the employer did not assure that all employees were trained in the purpose, usage, safe application and removal of the energy control procedures. Employees were not trained as authorized or affected personnel.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.1200 E01
- Issued
- May 15, 2014
- Abate by
- Jul 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) On or about March 28, 2014, the employer did not develop a written hazard communication program to describe how labels and other forms of warning shall be utilized and how employee information and training on the hazardous chemicals in the work place would be accomplished. The employees use industrial type products such as, but not limited to, mold release and industrial cleaners when performing their job tasks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- May 15, 2014
- Abate by
- Jul 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about March 19, 2014, the employer did not provide information and training to employees in the safe handling and use of hazardous chemicals including, but not limited to, mold release and industrial cleaners. Employees were not aware of the Personal Protective Equipment (PPE) requirements, first aid measures, and potential health effects of exposure to these chemicals.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Pioneer Custom Molding, INC.
View Pioneer Custom Molding, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339651754.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.