BIG FLATS, NY —
OSHA Inspection: REYNOLDS MANUFACTURING INC.
Unprogrammed Other inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Other health inspection of REYNOLDS MANUFACTURING INC. in 3298 STATE ROUTE 352, BIG FLATS, NY 14814 (NAICS 332322). OSHA activity number 339653537.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REYNOLDS MANUFACTURING INC.
- Site address
- 3298 STATE ROUTE 352
- City
- BIG FLATS
- State
- NY
- ZIP
- 14814
- Mailing
- P.O. BOX 436, BIG FLATS, NY 14814
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C
- Issued
- May 6, 2014
- Abate by
- Jun 8, 2014
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) Reynolds Manufacturing, Inc., on or about 3/25/14: The employer had not developed or implemented a written respiratory protection program when employees are required to wear half-mask respirators for painting operations.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.134 E01
- Issued
- May 6, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Reynolds Manufacturing Inc., , on or about 3/25/14: Employees are required to wear 1/2-mask respirators when spray painting and were not provided a medical evaluation to determine their ability to use a respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F01
- Issued
- May 6, 2014
- Abate by
- Jun 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) At the facility, on or about 3/25/14: Employees who are required to wear a half-mask respirator when painting were not provided with a fit test to ensure that the respirator fit properly and provided adequate protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- May 6, 2014
- Abate by
- Jun 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a) At the facility, on or about 3/25/14: Employees who are required to wear half-mask respirators were not provided with training on the use, care and limitations of the respirator worn.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 I07
- Issued
- May 6, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.134(i)(7): Oil lubricated compressor(s) used to supply breathing air did not have a high-temperature or carbon monoxide alarm(s) or both: a) Sandblasting Area, on or about 3/25/14: An oil lubricated compressor was used to supply breathing air to the sandblast operator and was not equipped with a high-temperature or carbon monoxide alarm.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.1026 D01
- Issued
- May 6, 2014
- Abate by
- Jun 8, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): a) Reynolds Manufacturing Inc., on or about 4/2/14: The employer did not determine the 8-hour time-weighted average exposure for each employee welding on stainless steel.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
More inspections at Reynolds Manufacturing INC.
View Reynolds Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339653537.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.