PLAINFIELD, IL —
OSHA Inspection: H & R CARPENTRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of H & R CARPENTRY, INC. in CREEKSIDE CROSSING 15801 & 15805 CREEKVIEW, PLAINFIELD, IL 60544 (NAICS 238130). OSHA activity number 339679508.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H & R CARPENTRY, INC.
- Site address
- CREEKSIDE CROSSING 15801 & 15805 CREEKVIEW
- City
- PLAINFIELD
- State
- IL
- ZIP
- 60544
- Mailing
- 3727 S. 57TH COURT, CICERO, IL 60804
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.20 B01
- Issued
- May 20, 2014
- Abate by
- Jul 17, 2014
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part: a. On or about April 15, 2014, at the above addressed jobsites, a safety and health program, which would address those hazards associated with the employees' work environment and the company's procedures to eliminate exposure to those hazards had not been developed and maintained.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1926.20 B02
- Issued
- May 20, 2014
- Abate by
- Jul 17, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers: a. On or about April 15, 2014, at the above addressed jobsites, safety inspections had not been made by persons capable of recognizing and correcting those hazards which could result in employee injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B13
- Issued
- May 20, 2014
- Abate by
- May 27, 2014
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure: a. On or about April 15, 2014, at 15801 Creekview in Plainfield, IL, an employee installing the roof sheeting an the 9/12 pitched roof was exposed to falls of approximately 20 feet due to the lack of fall protection. b. On or about April 15, 2014, at 15805 Creekview in Plainfield, IL, employees installing the roof trusses were exposed to falls of approximately 20 feet while working from the exterior wall top plate without fall protection.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1926.503 A01
- Issued
- May 20, 2014
- Abate by
- Jul 17, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: a. On or about April 15, 2014, at the above addressed jobsites, an employee training program addressing fall hazards and the company's procedures to be followed to protect the employees from exposure to those hazards had not been developed and maintained.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1052 C01
- Issued
- May 20, 2014
- Abate by
- May 27, 2014
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, shall be equipped with: a. On or about April 15, 2014, at 15801 Creekview in Plainfield, IL, employees were exposed to falls of approximately 10 feet from the access stairs which were not equipped with a handrail on the open right side ascending b. On or about April 15, 2014, at 15805 Creekview in Plainfield, IL employees were exposed to falls of approximately 10 feet from the access stairs which were not equipped with handrails on both open sides.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1060 A
- Issued
- May 20, 2014
- Abate by
- Jul 17, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards: a. On or about April 15, 2014, at the above addressed jobsite, an employee training program addressing the hazards of stairways and ladder use had not been developed and maintained.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at H & R Carpentry, INC.
View H & R Carpentry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339679508.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.