DOTHAN, AL ·
OSHA Inspection: WIREGRASS MACHINE, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of WIREGRASS MACHINE, INC. in 9419 HWY 84 WEST, DOTHAN, AL 36305 (NAICS 332710). OSHA activity number 339741449.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WIREGRASS MACHINE, INC.
- Site address
- 9419 HWY 84 WEST
- City
- DOTHAN
- State
- AL
- ZIP
- 36305
- Mailing
- P.O. BOX 1507, DOTHAN, AL 36302
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Jul 15, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a) Wiregrass Machine Facility: On or about April 21, 2014 and at times prior thereto the employer did not establish and implement a written respiratory protection program with worksite specific procedures for employees required to use Moldex N95 respirators during spray painting operations.
Recent events (1)
- · Z (O) $0
1910.134 E01
- Issued
- Jul 15, 2014
- Abate by
- Jul 25, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees' ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Wiregrass Machine Facility: On or about April 21, 2014 and at times prior thereto the employer did not provide a medical evaluation to determine the employee(s) ability to use a Moldex N95 respirator during spray painting tasks.
Recent events (1)
- · Z (O) $0
1910.134 F02
- Issued
- Jul 15, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: (a)Wiregrass Machine Facility: On or about April 21, 2014 and at times prior thereto the employer did not ensure that employee(s) using tight fitting respirators were fit tested prior to initial use of the Moldex N95 respirator exposing employees to respiratory hazards.
Recent events (1)
- · Z (O) $0
1910.1200 E01 I
- Issued
- Jul 15, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not comply a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet. a)Wiregrass Machine Facility: On or about April 21, 2014 and at times prior thereto the employer did not comply a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet for chemicals such as but not limited to spindle oil, hydraulic oil and various types of acrylic enamel.
Recent events (1)
- · Z (O) $0
1910.1200 H01
- Issued
- Jul 15, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Wiregrass Machine Facility: On or about April 21, 2014 and at times prior thereto the employer did not provide effective information and training to employees on hazardous chemicals in their work area at the time of their initial assignment for chemicals such as but not limited to spindle oil, hydraulic oil, general purpose thinner and various types of acrylic enamel.
Recent events (1)
- · Z (O) $0
More inspections at Wiregrass Machine, INC.
View Wiregrass Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339741449.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.