OSHA Inspection: D & D INDUSTRIES, INC.

Issued

Sep 10, 2014

Abate by

Oct 6, 2014

Penalty

Initial $3,850 · Current $3,850

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1):    The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees are exposed to crushing hazards associated with failing to utilize seat belts while operating powered industrial trucks (fork lifts).

Issued

Sep 10, 2014

Abate by

Oct 14, 2014

Penalty

Initial $3,850 · Current $3,850

General-duty citation text

29 CFR 1910.147(c)(7)(i):   The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    Worksite located at 1697 Dove Hill Ave, Kearney, NE:  The employer failed to ensure that any employee involved or affected by lockout/tag out operations had received the level of training necessary to ensure the safe application, usage and removal of energy control devices.      Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.

Issued

Sep 10, 2014

Abate by

Oct 6, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1910.176(b):   Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:  Worksite located at 1697 Dove Hill Ave, Kearney, NE and Throughout the Company:  Stacking of pallets was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding or collapse.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.

Issued

Sep 10, 2014

Abate by

Oct 6, 2014

Penalty

Initial $3,850 · Current $3,850

General-duty citation text

29 CFR 1910.178(l)(1)(i):   The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Worksite located at 1697 Dove Hill Ave, Kearney, NE and Throughout the Company:  The employer failed to ensure that each operator of a powered industrial truck had been trained in the manner described in the standard.    Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.

Issued

Sep 10, 2014

Abate by

Oct 14, 2014

Penalty

Initial $2,310 · Current $2,310

General-duty citation text

29 CFR 1910.1200(h):  Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and (2) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:                    Worksite located at 1697 Dove Hill Ave, Kearney, NE and Throughout the Company:  The employer failed to provide training as prescribed in the paragraph above.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.