MONTGOMERY, AL —
OSHA Inspection: THERMASYS CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THERMASYS CORPORATION in 2760 GUNTER PARK DRIVE WEST, MONTGOMERY, AL 36109 (NAICS 336399). OSHA activity number 339781098.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THERMASYS CORPORATION
- Site address
- 2760 GUNTER PARK DRIVE WEST
- City
- MONTGOMERY
- State
- AL
- ZIP
- 36109
- Mailing
- 2760 GUNTER PARK DRIVE WEST, MONTGOMERY, AL 36109
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 900
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 18, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $3,400 · Current $1,800 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards: a) 2760 Gunter Park Drive West, Montgomery AL - Warehouse; On or about May 22, 2014 and at times prior thereto, the employer exposed employees to struck-by hazards in that employees were allowed to walk and work around steel storage racks which were damaged and the column base plates were not anchored to the floor.
Recent events (2)
- — I (S) $1800
- — Z (S) $3400
1910.212 A01
- Issued
- Jun 18, 2014
- Abate by
- Jun 30, 2014
- Penalty
- Initial $4,250 · Current $2,300 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by in-going nip points: a) Mill 5; On or about May 22, 2014 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to operate Mill 5 final side with the rollers unguarded. b) Mill 6; On or about May 22, 2014 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to operate Mill 6 final side with the rollers unguarded.
Recent events (2)
- — I (S) $2300
- — Z (S) $4250
1910.215 A04
- Issued
- Jun 18, 2014
- Abate by
- Jun 26, 2014
- Penalty
- Initial $2,550 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a) Production Floor; On or about May 22, 2014 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to operate a bench grinder with the work rest not properly adjusted.
Recent events (2)
- — I (S) $1200
- — Z (S) $2550
1910.215 B09
- Issued
- Jun 18, 2014
- Abate by
- Jun 26, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) a) Production Floor; On or about May 22, 2014 and at times prior thereto the employer exposed employees to stuck-by hazards in that they were allowed to operate a bench grinder with the tongue guard missing.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.243 C01
- Issued
- Jun 18, 2014
- Abate by
- Jun 26, 2014
- Penalty
- Initial $2,550 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a): a) Production Floor; On or about May 22, 2014 and at times prior thereto the employer exposed employees to struck-by hazards in that employees were allowed to use a Milwaukee vertical portable grinder with the guard removed.
Recent events (2)
- — I (S) $1200
- — Z (S) $2550
More inspections at Thermasys Corporation
View Thermasys Corporation's full OSHA safety record →
More inspections in this industry (NAICS 336399)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339781098.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.