SHIPPENSBURG, PA —
OSHA Inspection: SHIPPENSBURG PUMP COMPANY INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SHIPPENSBURG PUMP COMPANY INCORPORATED in 1 SCHWENK DRIVE, SHIPPENSBURG, PA 17257 (NAICS 333911). OSHA activity number 339783441.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHIPPENSBURG PUMP COMPANY INCORPORATED
- Site address
- 1 SCHWENK DRIVE
- City
- SHIPPENSBURG
- State
- PA
- ZIP
- 17257
- Mailing
- PO BOX 279, SHIPPENSBURG, PA 17257
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Records only (C)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333911
- Employees
- 38
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 B09
- Issued
- Jun 18, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $1,890 · Current $1,418 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) 1 Schwenk Drive, Shippensburg Pennsylvania, Pump Assembly - An employee used an abrasive wheel of a Jet bench grinder that was not provided with a tongue guard, on or about May 28, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1417.5
- — Z (S) $1890
1910.134 D03 III B 2
- Issued
- Jun 18, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(d)(3)(iii)(B)(2): The employer did not implement a change schedule for respirators not equipped with an End of Service Life Indicator that would ensure cartridges were changed before the end of their service life: (a) 1 Schwenk Drive, Shippensburg Pennsylvania - The employer did not implement a change schedule for cartridges that did not have an end of service life indicator, on or about May 28, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 F02
- Issued
- Jun 18, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: (a) 1 Schwenk Drive, Shippensburg Pennsylvania - The employer did not conduct annual fit test on employees wearing elastomeric respirator, on or about May 28, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 II
- Issued
- Jun 18, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not contain the required documentation on identification of the machine or equipment, inspection date, employees included, and the person performing the inspection: (a) 1 Schwenk Drive, Shippensburg Pennsylvania - The employer did not complete a certification of the energy control procedures that were observed, on or about May 28, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Shippensburg Pump Company Incorporated
View Shippensburg Pump Company Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 333911)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339783441.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.