SHIPPENSBURG, PA —
OSHA Inspection: SHIPPENSBURG PUMP COMPANY INCORPORATED
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SHIPPENSBURG PUMP COMPANY INCORPORATED in 1 SCHWENK DRIVE, SHIPPENSBURG, PA 17257 (NAICS 333914). OSHA activity number 345982342.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHIPPENSBURG PUMP COMPANY INCORPORATED
- Site address
- 1 SCHWENK DRIVE
- City
- SHIPPENSBURG
- State
- PA
- ZIP
- 17257
- Mailing
- PO BOX 279, SHIPPENSBURG, PA 17257
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333914
- Employees
- 46
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 E01
- Issued
- Sep 26, 2022
- Abate by
- Dec 16, 2022
- Penalty
- Initial $8,702 · Current $6,091 Reduced
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace: a) Shippensburg Pump Company Inc. - 1 Schwenk Drive, Shippensburg, PA - Welding Area - Employees in the welding area were not medically cleared to wear Moldex N-99 (Model 2310) Filtering Facepiece Particulate Respirators exposing employees to health hazards from metal fumes while conducting welding operations, on or about May 25, 2022. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $6091.4
- — Z (S) $8702
1910.134 F01
- Issued
- Sep 26, 2022
- Abate by
- Dec 16, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) Shippensburg Pump Company Inc. - 1 Schwenk Drive, Shippensburg, PA - Welding Area - . Employee(s) were not provided a qualitative fit test (QLFT) or quantitative fit test (QNFT) on the Moldex N-99 (Model 2310) Filtering Facepiece Particulate Respirators, exposing employees to health hazards from welding fumes while conducting welding processes, on or about , on or about May 25, 2022. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01
- Issued
- Sep 26, 2022
- Abate by
- Dec 16, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) Shippensburg Pump Company Inc. - 1 Schwenk Drive, Shippensburg, PA - Welding Area - Employee(s) were not adequately trained on the use of the respirator as personal protective equipment, its limitations, cleaning/storage, etc. while wearing a Moldex N-99 (Model 2310) Filtering Facepiece Particulate Respirators, exposing employees to health hazards from welding fumes while conducting sanding operations, on or about , on or about May 25, 2022. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 C01
- Issued
- Sep 26, 2022
- Abate by
- Oct 21, 2022
- Penalty
- Initial $8,702 · Current $6,091 Reduced
General-duty citation text
29 CFR 1910.146(c)(1):The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces. a) Shippensburg Pump Company Inc. - 1 Schwenk Drive, Shippensburg, PA - the employer did not identify or evaluate the workplace to determine if any spaces were permit-required confined spaces associated with the construction of boiler/pressure vessels; thereby exposing employees to physical or health hazards on or about May 25, 2022. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $6091.4
- — Z (S) $8702
More inspections at Shippensburg Pump Company Incorporated
View Shippensburg Pump Company Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 333914)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345982342.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.