BOISE, ID ·
OSHA Inspection: YOUNG'S HEAVY EQUIPMENT
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of YOUNG'S HEAVY EQUIPMENT in 203 E AMITY, BOISE, ID 83702 (NAICS 339999). OSHA activity number 339794372.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YOUNG'S HEAVY EQUIPMENT
- Site address
- 203 E AMITY
- City
- BOISE
- State
- ID
- ZIP
- 83702
- Mailing
- P.O. BOX 5068, BOISE, ID 83705
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 4
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Jul 18, 2014
- Abate by
- Sep 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1): In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer, the employer did not establish and implement a written respiratory protection program with worksite-specific procedures. a) Employees are spray painting trailers and other heavy equipment with paints that contain solvents such as butyl acetate and toluene. During this operation, employees are wearing 1/2 face elastomeric respirators, and the employer has not implemented a written respiratory protection program. Abatement certification is required for this item.
Recent events (1)
- · Z (O) $0
1910.134 D01 III
- Issued
- Jul 18, 2014
- Abate by
- Sep 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; this evaluation shall include a reasonable estimate of employee exposures to respiratory hazard(s) and an identification of the contaminant's chemical state and physical form. a) Employees are spray painting trailers and other heavy equipment with paints that contain solvents such as butyl acetate and toluene. During this operation, employees are wearing 1/2 face elastomeric respirators, and the employer has not evaluated the workplace to estimate employee exposure to respiratory hazards. Abatement certification is required for this item.
Recent events (1)
- · Z (O) $0
1910.134 E01
- Issued
- Jul 18, 2014
- Abate by
- Sep 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. a) Employees are spray painting trailers and other heavy equipment with paints that contain solvents such as butyl acetate and toluene. During this operation, employees are wearing 1/2 face elastomeric respirators, and the employer has not conducted medical evaluations for these employees. Abatement certification is required for this item.
Recent events (1)
- · Z (O) $0
1910.134 F02
- Issued
- Jul 18, 2014
- Abate by
- Sep 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting facepiece respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. a) Employees are spray painting trailers and other heavy equipment with paints that contain solvents such as butyl acetate and toluene. During this operation, employees are wearing 1/2 face elastomeric respirators, and the employer has not conducted annual fit tests for these employees. Abatement certification is required for this item.
Recent events (1)
- · Z (O) $0
More inspections at Young'S Heavy Equipment
View Young'S Heavy Equipment's full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339794372.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.