Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HILEX POLY COMPANY, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of HILEX POLY COMPANY, LLC in 606 OLD CURTIN ROAD, MILESBURG, PA 16853 (NAICS 326111). OSHA activity number 339805715.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hilex Poly Company, LLC — free Get an email when a new federal OSHA severe-injury report for Hilex Poly Company, LLC is published. One employer, no account, unsubscribe in one click.
Site address
606 OLD CURTIN ROAD
City
MILESBURG
State
PA
ZIP
16853
Mailing
101 EAST CAROLINA AVENUE, HARTSVILLE, SC 29550
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326111
Employees
165
Ownership type
A

4 citations on file for this inspection.

1910.22 B01

Serious Gravity 1 2 instances 16 exposed
Issued
Nov 21, 2014
Abate by
Dec 18, 2014
Penalty
Initial $2,550 · Current $2,550
29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard:  a) Top of Stairs On Winder Level - Employees entering and exiting the upper level "Winders" were exposed to struck by hazards from Winder 28 and Winder 32 rotating into the aisle, on or about June 12th, 2014.  b) Top of Stairs on Winder Level - Employees entering and exiting the upper level "Winders" were exposed to struck by hazards from Winder 8 and Winder 12 rotating into the aisle, on or about June 12th, 2014.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $2550

1910.212 A03 II

Serious Gravity 5 1 instance 16 exposed
Issued
Nov 21, 2014
Abate by
Dec 18, 2014
Penalty
Initial $4,250 · Current $4,250
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  a)  Upper Level Winders - Employees changing out rolls on the twenty two (22) Kiefel 113mm Line machines were exposed to point of operation hazards from unguarded rotating parts, on or about June 12th, 2014.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $4250

1910.1200 F05

Other-than-serious 1 instance 28 exposed
Issued
Nov 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein:  a) Bag Line - Containers with chemicals were not tagged, labeled or marked with the identity and appropriate hazard warnings exposing employees to hazardous material hazards, on or about June 12th, 2014.  No abatement certification or documentation required.
Recent events (1)
  • — Z (O) $0

1910.1200 H03 IV

Other-than-serious 1 instance 165 exposed
Issued
Nov 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the  safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  a) 606 Old Curtin Rd  - Employees were not trained on the explanation of the safety data sheet, including the order of information and how employees could obtain and use, on or about June 12th, 2014.  No abatement certification or documentation required.
Recent events (1)
  • — Z (O) $0

View Hilex Poly Company, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339805715.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.